I purchased a used ShadeTree Engineering co-axial top and due to packaging constraints with rest and other stuff, the ShadeTree top was partially disassembled. Being a bit of an apparent dunce with some mechanical things and not wanting to screw anything up, I can't figure out how it goes back together.
When unpacking, I grabbed the top of the co-ax rest and pulled up, which separated the top part of the ShadeTree rest from the rest of it. That left me looking at the guts of the thing, where there are two springs, and two sets of different looking pins, and a sliding plate that somehow all fit together. The top portion of the top that still has the bag attached it, somehow fits in there.
I have instructions, but it is not making sense to me.
Any help is most appreciated.
Phil
When unpacking, I grabbed the top of the co-ax rest and pulled up, which separated the top part of the ShadeTree rest from the rest of it. That left me looking at the guts of the thing, where there are two springs, and two sets of different looking pins, and a sliding plate that somehow all fit together. The top portion of the top that still has the bag attached it, somehow fits in there.
I have instructions, but it is not making sense to me.
Any help is most appreciated.
Phil