• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Another home made stock thread

The other stock in this thread got painted today ,I've had it in primer for a while so I got it all sanded last night ready for today. Had to be careful opening the door cause the wind is about 35 mph blowing right in the door. It came out pretty clean , a lot cleaner than the last one. I'm not sure I like the color but I'm not changing it. It looks good in the sunlight just not under the LED lights in the shop. So anyway here it is
IMG_0289.jpgPrimed and ready to go
IMG_0290 (1).jpg First coat of basecoat

IMG_0292 (4).jpgFirst coat of clearIMG_0293.jpg

4 coats of clear , no runs this time. this clear is really slow to set up. 20 min between coats so its a lot of sitting around waiting, not something I'm good at. At least I didn't stick my finger in it which is what I usually do. I was done spraying at noon and at 3:30 I could still easily put a fingerprint in it in the taped off area.
 
scasa said:
The other stock in this thread got painted today ,I've had it in primer for a while so I got it all sanded last night ready for today. Had to be careful opening the door cause the wind is about 35 mph blowing right in the door. It came out pretty clean , a lot cleaner than the last one. I'm not sure I like the color but I'm not changing it. It looks good in the sunlight just not under the LED lights in the shop. So anyway here it is
View attachment 1500309Primed and ready to go
View attachment 1500310 First coat of basecoat

View attachment 1500311First coat of clearView attachment 1500312

4 coats of clear , no runs this time. this clear is really slow to set up. 20 min between coats so its a lot of sitting around waiting, not something I'm good at. At least I didn't stick my finger in it which is what I usually do. I was done spraying at noon and at 3:30 I could still easily put a fingerprint in it in the taped off area.
Click to expand...
Beautiful shoot, I call that a "Motha Fkn No Rub"
It's sure has been a week of Red. Your 2 and my 3.
I like the softer/finer metallic on this, it gives the color a rich feel.
What clear are you using?
I have a automotive clear that I use in my process that is strictly a barrier/scratch coat for my polyester to go on top, I can spray 3 double wet coats and be buffing in 2 hours @70°f It's designed for 1-2 panels on a car no baking.

20231205_101517.jpgHere's lookin at ya through rose colored glasses.
Shot with my speed clear
 
Bc'z said:
Beautiful shoot, I call that a "Motha Fkn No Rub"
It's sure has been a week of Red. Your 2 and my 3.
I like the softer/finer metallic on this, it gives the color a rich feel.
What clear are you using?
I have a automotive clear that I use in my process that is strictly a barrier/scratch coat for my polyester to go on top, I can spray 3 double wet coats and be buffing in 2 hours @70°f It's designed for 1-2 panels on a car no baking.

View attachment 1500398Here's lookin at ya through rose colored glasses.
Shot with my speed clear
Click to expand...
I used a LIME LINE clear I got on amazon for 47.00 The rocket clear from house of kolor was like 250..00 per qt . This stuff is slow but it lays down nice . I'll work on those dust nibs tomorrow.
 
scasa said:
I used a LIME LINE clear I got on amazon for 47.00 The rocket clear from house of kolor was like 250..00 per qt . This stuff is slow but it lays down nice . I'll work on those dust nibs tomorrow.
Click to expand...
My local jobber will ship, they have quart kits of the speed clear.
I think I'm paying $175 for the gallon kit
 
scasa said:
I'm going to have to build more guns I have nothing left to paint. I'm really just too cheap to buy the good stuff.
Click to expand...
I tend to think that way also. If I were doing work for others I'd be concerned with things like durability. But since I just work for myself I just worry about what fits my needs. If it works that's good. If it's cheap too that's perfect.
 
Bc'z said:
Beautiful shoot, I call that a "Motha Fkn No Rub"
It's sure has been a week of Red. Your 2 and my 3.
I like the softer/finer metallic on this, it gives the color a rich feel.
What clear are you using?
I have a automotive clear that I use in my process that is strictly a barrier/scratch coat for my polyester to go on top, I can spray 3 double wet coats and be buffing in 2 hours @70°f It's designed for 1-2 panels on a car no baking.

View attachment 1500398Here's lookin at ya through rose colored glasses.
Shot with my speed clear
Click to expand...
What a handsome fella, hey is that my candy root beer color you be sharin wit the brothers ? Looks awesome..:)
 
Well this project is complete. I'll need to get some scopes mounted up and do a target test. Thanks for all the comments and likes. Hope you all enjoyed and lets see some more home made stocks.IMG_0294.jpgIMG_0296.jpgIMG_0297.jpgIMG_0298.jpgIMG_0299.jpg

Some body posted an Anschutz pistol in a nice bench rest stock,
I need to go check my supplies and see what I can come up with.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,238
Messages
2,214,215
Members
79,464
Latest member
Big Fred

Share This Page

Back
Top