• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

and so it begins...6.5 gt

ballisticdaddy said:
Seems like a ton of work + money for a 6.5x47 Lapua with a GT stamped case
Click to expand...
I wouldn't call $275 for a reamer a ton of money, I'm sizing with my Forster 6GT die and using my 6.5 competition seater.
The only work involved is lubing necks and running brass through an expander mandrel, it gets even simpler if you buy Alpha 25 GT brass.
 
Evan said:
Could be said about all wildcats ever. Sometimes it’s about exploring and learning something new and not just about the cheapest, easiest path to a destination.
Click to expand...
Uhmm, the destination is basically remaking a 6.5x47 Lapua as that is the parent case for the 6/6.5GT.
 
762 ULTRAMAGA said:
I wouldn't call $275 for a reamer a ton of money, I'm sizing with my Forster 6GT die and using my 6.5 competition seater.
The only work involved is lubing necks and running brass through an expander mandrel, it gets even simpler if you buy Alpha 25 GT brass.
Click to expand...
I completely get that, been shooting 6.5 Creedmoor and 284 Win well before any headstamped brass was available but that was the only way to do it then.
 
Dave......I'm surprised Mike did'nt talk you into one of his signature
canoe paddle stocks ?? You need to try it out at this years Pa. Tack
Driver Lite. Quite a few of the Ridgway shooters come out for it. It's
300 yards, so should be a cake walk for ya', maybe LOL. You shoot
both group and score. Mike won overall last year followed by Joe
Stewart. Tough crowed.......
 
Fuj said:
Dave......I'm surprised Mike did'nt talk you into one of his signature
canoe paddle stocks ?? You need to try it out at this years Pa. Tack
Driver Lite. Quite a few of the Ridgway shooters come out for it. It's
300 yards, so should be a cake walk for ya', maybe LOL. You shoot
both group and score. Mike won overall last year followed by Joe
Stewart. Tough crowed.......
Click to expand...
Hi Fuj,
I haven't shot a score match since 1989.


dave
 
There was a time I dabbled with the 6.5 but got it out of my system
and went right back to the 7mm's. However.....That .284 ELF of mine
that I shortened from a .284 Winchester is right between the 6.5x47
and the 6GT. Almost turned that into a 6.5 when my 7mm bullets
dried up. But I said.........Naaaaah, and wild catted another 7mm based
on the 284 Winchester. This one is in testing !!
 
So, anybody have any word on any other forums or match's where
6bra1k headed off to ?? Several years is a bit long, so hope he's in
good health in at least that respect.
 
Last edited:
Fuj said:
That's some nice looking wood. Who cut and shaped it ?? Did Mike
do a laying on of the hands on this one also ??
Click to expand...
Hi Fuj
The stock is a modified Tooley tracker.
It's actually a laminate.
Carl Bernosky had a pallet of walnut that he had been sitting on for many years.
He fabbed it together and duplicated it.
There are two stocks.
My spotter has the other.
Alex Sitmam bedded and finished it.
Mike fitted the barrel.


dave
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,788
Messages
2,203,382
Members
79,110
Latest member
miles813

Share This Page

Back
Top