Adjustable cheek riser hardware

[Killroy]

Looking for a source of simple and "affordable" cheeck risers, like the one pictured. All the ones on eBay are in Europe. I definitely like the Mcgees thumbwheel kits but all that is not needed in my current project

 

[joshb]

This is the only one I use. $69 a set.

 

[KMW 1954]

Atlasworxs – Adjustable Cheek / Comb Riser – Atlasworxs

atlasworxs.com

This is the one I purchased for my Richards Microfit build. Purchased mine from kinneysshootingsupply.com But I see that right now they will be closed until 10/20 due to a medical emergency.

 

[LVLAaron]

LoggerHead is the best sh!t

 

[tobnpr]

Graco

 

[Killroy]

LoggerHead is the best sh!t

Must be. It's out of stock.

 

[joshb]

Maybe I have an extra set if you need one. I just migrated to Texas for the winter. Let me get the truck unloaded and get organized. I’m not sure how many I have or how many blanks need them.
Josh

 

[Killroy]

Maybe I have an extra set if you need one. I just migrated to Texas for the winter. Let me get the truck unloaded and get organized. I’m not sure how many I have or how many blanks need them.
Josh

Let me know

 

[joshb]

Let me know

Will do.

 

[joshb]

I just went out and dug thru my parts boxes and found 4 ACP sets. I have 4 stocks that need them so I’m sorry to say I don’t have an extra.
You might want to call KMW and ask when he’ll have more.

 

[Thauglor]

Can anyone recommend a person to install a set on a mcmiallan fn spr stock? I can pretty easily handle the install, it is the cutting of stock where I would screw it up

 

[Liven The Dream]

Can anyone recommend a person to install a set on a mcmiallan fn spr stock? I can pretty easily handle the install, it is the cutting of stock where I would screw it up

Master Class or Doan Trevor

 

[357Mag]

Looking for a source of simple and "affordable" cheeck risers, like the one pictured. All the ones on eBay are in Europe. I definitely like the Mcgees thumbwheel kits but all that is not needed in my current project



View attachment 1703232

Killroy -

Howdy !

Here's a pic of a simple/ low costm cheek " locator ".

Some thing like this could be further enhanced by adding a threaded insert to the butt stock, a slightly arc’ed cut-out slot in the side of the plastic locator ( “ riser ); and a threaded knob used for tighten the locator to affix the chosen final position.

I went w/ a single fwd attach point, and made use of the plastic's flexible properties to allow pivoting the locator higher... mostly @ it's aft end.

One could alternately use a Kidex sheet or similar, slots in the sheet' threaded inserts in the stock; and mating threaded knobs..... to fashion an adjustable cheek locator.

Additional layers or perhaps eveni a gap filler the foam could be included, to bolster
a holllow cheek locator; for applications where cheek contact might be more vigorous.

" Better living, through plastics ".


With regards,
357Mag

 

[ISS]

My CERUS came with the RAD system cheekpiece and butt stock already fitted.
That was from Will in HI about sixteen months ago.

 

[Killroy]

Killroy -

Howdy !

Here's a pic of a simple/ low costm cheek " locator ".

Some thing like this could be further enhanced by adding a threaded insert to the butt stock, a slightly arc’ed cut-out slot in the side of the plastic locator ( “ riser ); and a threaded knob used for tighten the locator to affix the chosen final position.

I went w/ a single fwd attach point, and made use of the plastic's flexible properties to allow pivoting the locator higher... mostly @ it's aft end.

One could alternately use a Kidex sheet or similar, slots in the sheet' threaded inserts in the stock; and mating threaded knobs..... to fashion an adjustable cheek locator.

Additional layers or perhaps eveni a gap filler the foam could be included, to bolster
a holllow cheek locator; for applications where cheek contact might be more vigorous.

" Better living, through plastics ".


With regards,
357Mag

Interesting