Accurizing a Rem. 40x vrs. a Rem. 700 action

[ireload2]

Lambert I can see it is going to take you years to figure this out.

So you read in a magazine that Mike Walker said they etched the markings on the 40X, so you determined that they were made from prehardened steel and the 700 were heat treated afterward?
If this isn't internet legend, what is your source?

 

[butchlambert]

Lambert I can see it is going to take you years to figure this out.

What I thought. You have not a clue!

 

[ireload2]

Is this you Harren?

"The first thing to do, when you find yourself in a hole, is to stop digging."--Will Rodgers.

 

[Eddie Harren]

Is this you Harren?

Looks more like your "Good Side". You have a great profile!

 

[butchlambert]

Kid,
You are in over your head. Quit digging. You made a statement and have failed to back it up. Crawl back under your rock.

 

[ireload2]

Fish on

What I thought. You have not a clue!

 

[ireload2]

Lambert you apparently cannot read and I am enjoying your antics.
Have fun.
BTW drop the young man and kid baloney. It makes you look very foolish.

Kid,
You are in over your head. Quit digging. You made a statement and have failed to back it up. Crawl back under your rock.

 

[butchlambert]

Gave up without providing us with an answer. Not surprised. Al lot of kids are like that.
I just love to give and take with a feller like you, Oh boy!

 

[ireload2]

Did you know that other people here sent me PM warnings about you two and the passive aggressive BS arguments that you like to start? Apparently you have a bad reputation on this forum.
Since your main goal seems to be to start a fight and you cannot seem to comprehend what I write I will just let you stew. Like I said you can stop with the kid baloney. It really makes you look bad considering I have 2 younger brothers that are both grandfathers.

Gave up without providing us with an answer. Not surprised. Al lot of kids are like that.
I just love to give and take with a feller like you, Oh boy!

 

[butchlambert]

Did you know that other people here sent me PM warnings about you two and the passive aggressive BS arguments that you like to start? Apparently you have a bad reputation on this forum.
Since your main goal seems to be to start a fight and you cannot seem to comprehend what I write I will just let you stew. Like I said you can stop with the kid baloney. It really makes you look bad considering I have 2 younger brothers that are both grandfathers.

\

Kid, All I asked of you was to provide your source to your statement. I don't think your comprehension is up to snuff. I think you are stewing because you made a statement that wasn't true.
Is my request that hard to understand or are you just want to direct this thread into a different direction?

 

[ireload2]

You are calling a grandfather kid.
So kid when are you going to stop it?
My statement was correct and I told you to go back and re-read it because apparently you did not comprehend what was said.
That is when I started getting the warnings about not being dragged into one of your mr know it all arguments. You should be embarrassed.

\

Kid, All I asked of you was to provide your source to your statement. I don't think your comprehension is up to snuff. I think you are stewing because you made a statement that wasn't true.
Is my request that hard to understand or are you just want to direct this thread into a different direction?

 

[butchlambert]

You are calling a grandfather kid.
So kid when are you going to stop it?
My statement was correct and I told you to go back and re-read it because apparently you did not comprehend what was said.
That is when I started getting the warnings about not being dragged into one of your mr know it all arguments. You should be embarrassed.

I've read it a couple times and it is still the same. You stated the 700s were roll stamped in the soft and then heat treated, You stated that the 40XBR were machined out of prehard steel making them not suitable for stamping. All I asked you for was to provide an accurate source to your info. You chose to act like a kid and get upset rather than answer my question.You should have said that you were lead to believe it was true, but that you would provide a source for your info, old man.

 

[ireload2]

You challenged what I said as if it was a lie. After you passed the point of civility you burned any chance at my cooperation.

I've read it a couple times and it is still the same. You stated the 700s were roll stamped in the soft and then heat treated, You stated that the 40XBR were machined out of prehard steel making them not suitable for stamping. All I asked you for was to provide an accurate source to your info. You chose to act like a kid and get upset rather than answer my question.You should have said that you were lead to believe it was true, but that you would provide a source for your info, old man.

 

[butchlambert]

You have a PM.