700 Sako extractor tuning

[mshelton]

I'm sure this is a basic 101 question and the answer is probably no but I'll ask it anyway just to be sure.

I have a 700 SA with a Sako style extractor installed, is there anything that can be done to change the ejection angle of the brass?
My empty cases are hitting the bottom of my scope and dropping back into the receiver.

 

[Dans40X]

OR-
relocate the ejector plunger hole to 9 o'clock position.
OR-
purchase a PT&G bolt body w/ SAKO Ext cut & ejector @ 9'oclock position.
(referencing a RH eject bolt)

 

[mshelton]

OR-
relocate the ejector plunger hole to 9 o'clock position.
OR-
purchase a PT&G bolt body w/ SAKO Ext cut & ejector @ 9'oclock position.
(referencing a RH eject bolt)

Do you know of anyone that will relocate the plunger?

 

[ultraedge]

My Rem 700 bolts have M-16 extractors. I had the same problem with the angle of ejection. Whidden's Gunworks added a second ejector to the bolt and it works fine. I am having 6 more done. Gary