6 Dasher Norma?

[esromvre1]

What is your normal load in this brass?
What is normal brass life of this brass in your load?
Anything that I should be aware of using this brass?

New to Dasher so looking to learn from others on this one.

Thank You

 

[Liven The Dream]

Have two 30” 1-7.5 twist 103 -108 Bullets
31.2 -32.0 Grs. Varget . 2860 2900
6 Firing no sign of giving up .
Now if you want to Hot Rod it ?

I shoot 600 and 1000 yards .
Works well .
People say New Brass shot it Hot = short life ?
I am sold on it ?

 

[swd]

When the Norma Dasher first came out I tested one piece of brass. Shot it light the first load, worked up to slight bolt stickiness and backed off a half grain. I loaded it 9x’s total until it started raining hard enough that I stopped shooting and the primer pocket was still very tight.

 

[esromvre1]

Have two 30” 1-7.5 twist 103 -108 Bullets
31.2 -32.0 Grs. Varget . 2860 2900
6 Firing no sign of giving up .
Now if you want to Hot Rod it ?

I shoot 600 and 1000 yards .
Works well .
People say New Brass shot it Hot = short life ?
I am sold on it ?

What is the node speed for the 107 smk or 110 smk?

 

[Liven The Dream]

What is the node speed for the 107 smk or 110 smk?

107 2856 never shot 110’s . You know Norma Dasher is a different Reamer and the Brass has a .050 longer neck ?

 

[muleystalker]

Shoos.... 6 Dasher Norma brass sucks, it's no good everyone knows that, thats why it's in stock and not sold out. I wouldn't buy it......

 

[Liven The Dream]

Ok !!!! All that Dasher Brass that Su--s Please send to me.
Old Guy on Limited Fixed Income.
Please Print your name clearly. I will Pray for you on Sunday Service.

 

[muleystalker]

Ok !!!! All that Dasher Brass that Su--s Please send to me.
Old Guy on Limited Fixed Income.
Please Print your name clearly. I will Pray for you on Sunday Service.

Shoos..... don't let the cat out of the bag! Opps....

 

[Rubberduckie]

I avoided norma brass due to the notes on my reamer print. It noted norma brass needed .303 neck length. Anyone seen this or have issues from it?

 

[swd]

I avoided norma brass due to the notes on my reamer print. It noted norma brass needed .303 neck length. Anyone seen this or have issues from it?

It’s preferable to use the Norma Dasher reamer if your going to use the the Norma brass. And you have to trim .050” off the neck to use it in a Lapua Dasher chamber.

 

[Liven The Dream]

It’s preferable to use the Norma Dasher reamer if your going to use the the Norma brass. And you have to trim .050” off the neck to use it in a Lapua Dasher chamber.

Well I knew a Guy that bought 300 Norma Dasher Pieces of Brass ! only to find out He had to trim .050 off them.
I was very Sad.

 

[swd]

Well I knew a Guy that bought 300 Norma Dasher Pieces of Brass ! only to find out He had to trim .050 off them.
I was very Sad.

I built a Norma Dasher for someone and even supplied a bunch of brass. He messaged me that he had looked up Dasher trim length and cut them all back to 1.550”. It still shot fine, LOL!

I think he later won the Nevada State mid range championships with that rifle, with new brass, lol

 

[esromvre1]

107 2856 never shot 110’s . You know Norma Dasher is a different Reamer and the Brass has a .050 longer neck ?

No I did not know that

 

[esromvre1]

It’s preferable to use the Norma Dasher reamer if your going to use the the Norma brass. And you have to trim .050” off the neck to use it in a Lapua Dasher chamber.

OK not to sound stupid on this but i have made costly mistakes in the past so here is my question is tge .050 off of the overall length, or need to turn the neck thinner.

Cringing hitting the post button but I honestly don't know exactly what on this

 

[Bill Norris]

OK not to sound stupid on this but i have made costly mistakes in the past so here is my question is tge .050 off of the overall length, or need to turn the neck thinner.

Cringing hitting the post button but I honestly don't know exactly what on this

OAL of the case.

 

[muleystalker]

OK not to sound stupid on this but i have made costly mistakes in the past so here is my question is tge .050 off of the overall length, or need to turn the neck thinner.

Cringing hitting the post button but I honestly don't know exactly what on this

The neck on the NORMA 6 Dasher brass is .050" longer than a neck on Lapua 6BR case fire formed into a Lapua Dasher, if you use the Norma 6 dasher brass in a Lapua Dasher chamber you need to trim the Norma brass necks approx. .050" in OAL.

 

[esromvre1]

Thank you both

 

[swd]

Here’s a Norma Dasher next to a 6BRX which is the same length as a Lapua spec Dasher

 

[Gabe22BR]

Here’s a Norma Dasher next to a 6BRX which is the same length as a Lapua spec Dasher

That’s even got the THICK rim as well!!!

 

[swd]

That’s even got the THICK rim as well!!!

It fits in all but one of my actions and that one had Sako extractor put in really tight to the bolt face by a gunsmith. All the hoopla early on about the think rims was mostly BS. I prefer the first lot with thick rims.