What is the node speed for the 107 smk or 110 smk?Have two 30” 1-7.5 twist 103 -108 Bullets
31.2 -32.0 Grs. Varget . 2860 2900
6 Firing no sign of giving up .
Now if you want to Hot Rod it ?
I shoot 600 and 1000 yards .
Works well .
People say New Brass shot it Hot = short life ?
I am sold on it ?
107 2856 never shot 110’s . You know Norma Dasher is a different Reamer and the Brass has a .050 longer neck ?What is the node speed for the 107 smk or 110 smk?
Shoos..... don't let the cat out of the bag! Opps....Ok !!!! All that Dasher Brass that Su--s Please send to me.
Old Guy on Limited Fixed Income.
Please Print your name clearly. I will Pray for you on Sunday Service.
It’s preferable to use the Norma Dasher reamer if your going to use the the Norma brass. And you have to trim .050” off the neck to use it in a Lapua Dasher chamber.I avoided norma brass due to the notes on my reamer print. It noted norma brass needed .303 neck length. Anyone seen this or have issues from it?
Well I knew a Guy that bought 300 Norma Dasher Pieces of Brass ! only to find out He had to trim .050 off them.It’s preferable to use the Norma Dasher reamer if your going to use the the Norma brass. And you have to trim .050” off the neck to use it in a Lapua Dasher chamber.
I built a Norma Dasher for someone and even supplied a bunch of brass. He messaged me that he had looked up Dasher trim length and cut them all back to 1.550”. It still shot fine, LOL!Well I knew a Guy that bought 300 Norma Dasher Pieces of Brass ! only to find out He had to trim .050 off them.
I was very Sad.
No I did not know that107 2856 never shot 110’s . You know Norma Dasher is a different Reamer and the Brass has a .050 longer neck ?
OK not to sound stupid on this but i have made costly mistakes in the past so here is my question is tge .050 off of the overall length, or need to turn the neck thinner.It’s preferable to use the Norma Dasher reamer if your going to use the the Norma brass. And you have to trim .050” off the neck to use it in a Lapua Dasher chamber.
OAL of the case.OK not to sound stupid on this but i have made costly mistakes in the past so here is my question is tge .050 off of the overall length, or need to turn the neck thinner.
Cringing hitting the post button but I honestly don't know exactly what on this
The neck on the NORMA 6 Dasher brass is .050" longer than a neck on Lapua 6BR case fire formed into a Lapua Dasher, if you use the Norma 6 dasher brass in a Lapua Dasher chamber you need to trim the Norma brass necks approx. .050" in OAL.OK not to sound stupid on this but i have made costly mistakes in the past so here is my question is tge .050 off of the overall length, or need to turn the neck thinner.
Cringing hitting the post button but I honestly don't know exactly what on this
That’s even got the THICK rim as well!!!Here’s a Norma Dasher next to a 6BRX which is the same length as a Lapua spec Dasher
It fits in all but one of my actions and that one had Sako extractor put in really tight to the bolt face by a gunsmith. All the hoopla early on about the think rims was mostly BS. I prefer the first lot with thick rims.That’s even got the THICK rim as well!!!