6 Creed

[kyotekiller25]

Took my 6 Creed out yesterday after scrubbing the barrel and put 5 more factory 108 ELDMs through it to track barrel speed up and accuracy. When I first got the rifle, I bought a box of factory 108 ELDMs for a controlled test. My plan was to shoot 5 shots from the new BRUX barrel and record velocity/accuracy. Then I would do another 5 shots at the 100/150/200 round mark. The first 5 shots from the new barrel did 2980fps and 1/2 MOA. I then put a 100 rounds through it with my load of Peterson brass, H4350, and 108 ELDMs. I then scrubbed the barrel clean and put 5 more factory 108s through it last night. Average velocity was 3025fps and a smidgen under 1/2 MOA. Nice to see the CCB shot was also in the group. So it's looking like it's sped up almost 50fps in the first 100 rounds and accuracy has been at or under 1/2 MOA for the 5 shots.

 

[6brmo]

Great looking and shooting rifle.

 

[JB10]

How do you like the peterson brass? I use ADG in one of my 6cm. I just bought another rifle and have the ADG on back order. I was told possibly December-January on the brass. I thought about necking down some Lapua brass or just wait since im not in a hurry to shoot it yet

 

[kyotekiller25]

I like the Peterson LRP brass. It's been very good so far. I won't shoot SRP 6 Creed since this is primarily my coyote rifle and we see single digits/teens regularly. I'm not taking any chances or dealing with it anyway. I don't have any experience with ADG or Alpha brass. I've always just used Lapua or Peterson.

 

[Clancy]

Your rear bag is backwards. Might be able to get her down to 3/8 if you switch it