6.5 forever
Silver $$ Contributor
Absolutely agree here.42.3gr H4350 with 140gr ELD-M, CCI 200 primer and loading .015” off the lands provided great 1000yd results in my RPR.
Absolutely agree here.42.3gr H4350 with 140gr ELD-M, CCI 200 primer and loading .015” off the lands provided great 1000yd results in my RPR.
If you look at reloading data you will see that the IMR 4350 is slightly faster than H4350.Is IMR 4350 the same or close to H4350?
I'm starting to load for a Howa 1500 24"barrel and I have several #s of it.
My litegun I shoot in 1000 ibs is 6.5 creedmoore.I used up my H4895 so now onto another powder H4350. I want to challenge myself to the 1000 yard milk jug shoot. Any suggestions on component's - I already have the brass Norma LR primer and Lapua SR primer also the powder. What I need are loads for a Ruger RPR 1st gen, Vortex PST 6x24x50 FFP EBR2C Milrad reticle. What load data and bullets do you all use and or recommend. I do have a few Barnes 140 Match Burners and some 140 Hornady ELD's. So any equipment and loads will be appreciated.
Thanks
Too slow in what sense? I’ve run powders as slow as RL26 in my 6.5 so I’m skeptical of a claim that faster burn than 4350 is necessary. Heck, 6.5 can shoot accurately with anything from h4895 to h1000. But burn speed wise, 4350 is pretty much perfect.much better powders for the creed 4350 is just to slow
Absolutely agreed!Too slow in what sense? I’ve run powders as slow as RL26 in my 6.5 so I’m skeptical of a claim that faster burn than 4350 is necessary. Heck, 6.5 can shoot accurately with anything from h4895 to h1000. But burn speed wise, 4350 is pretty much perfect.
This.Too slow in what sense? I’ve run powders as slow as RL26 in my 6.5 so I’m skeptical of a claim that faster burn than 4350 is necessary. Heck, 6.5 can shoot accurately with anything from h4895 to h1000. But burn speed wise, 4350 is pretty much perfect.
Yep!Too slow in what sense? I’ve run powders as slow as RL26 in my 6.5 so I’m skeptical of a claim that faster burn than 4350 is necessary. Heck, 6.5 can shoot accurately with anything from h4895 to h1000. But burn speed wise, 4350 is pretty much perfect.
much better powders for the creed 4350 is just to slow
I look at it this way. If he's not using H4350, that means there is more for us that doGuess that's why they used H4350 to develop the cartridge. LOL![]()
wow...nice.40.5 gr H4350, 140 gr Horn A Max, CCI #41, .030 jump in my 6.5 CM. 1000 yd target.