30 br short bbl expectations?

[NC/Br Shooter]

SO, im just going to ask this straight up,
Could a 30br 17 twist with 20 inch bbl be capable of shooting zero's?

 

[Rewinder]

Its based on the Grendel case which is just a tad smaller than the 30br case.
https://forum.accurateshooter.com/threads/0077-smallest-5-shot-group-in-history.4041458/
The 30BR , can it shoot Zero's day in and day out if I do my part. No, but neither can a PPC.
It can once in a while but so can almost anything else. Except your Grandads '06
Most people searching for Zero's would use a 22 PPC or a 6PPC for lack of recoil as much as accuracy.

 

[Bob in WI]

SO, im just going to ask this straight up,
Could a 30br 17 twist with 20 inch bbl be capable of shooting zero's?

Absolutley

 

[farmerjohn]

Hey Feller, I love the BR and it's varients, had one before it was officially named, we called them 308x1&1/2. We were shooting steel silhouettes out to 300 with single shot handguns. Then as the 6BR got started I got into them big time, in talking to Bill Shehane who was a world class benchrest shooter and stockmaker and building me a stock at the time, about building me another for straight group benchrest in the LG class as I wanted to try the 6BR. He laughed and leaned back in his chair and said "boy, let me save you some money and time! There is nobody living or dead that wanted to prove that a 6BR could out agg a PPC any more than me. I have tried and tried and it just won't do it. In heavy gun class at 200 and the wind blowing you can win but the light gun just has too much recoil". That was about 15 or 20yrs ago and I still believe it.... John
Oh, and I still love my BRs, BRAs, and 30BRs and my PPCs

 

[Bill Norris]

SO, im just going to ask this straight up,
Could a 30br 17 twist with 20 inch bbl be capable of shooting zero's?

Absolutely, but the main idea with the 30BR was using it in score shooting as the 30 cal. bullet would cut the paper closer to the dot than the 6mm. The article here on the sight goes into great details with Ronnie Long, Smokin Joe, Al Nyhus, Randy Robinett on the subject.

You are being redirected...

 

[NC/Br Shooter]

Here's what has me concerned. I have a 30br, with a 25 inch barrel. I may go to a or I have an option to go to a new 30br, but it may only be 20 inch long barrel. Im sure ther may be a velocity loss. 5 inches gone! Think that might be short? Or say he'll with it and get tha darn thing finished and start pullin trigger? I know every build there's always that chance.

Talk me into it, or talk me out of it!

 

[RGRobinett]

30BR - probable velocity loss - about 7-8 FPS per inch of BBL: my 21 and 24" BBLs are usually about 19-20 feet apart. RG

 

[NC/Br Shooter]

30BR - probable velocity loss - about 7-8 FPS per inch of BBL: my 21 and 24" BBLs are usually about 19-20 feet apart. RG

That's not bad at all .

 

[Bill Norris]

That's not bad at all .

If I wanted a new barrel I think I would roll with it and not look back.

 

[Mike Casselton]

If it makes you feel any better, I'm waiting on a 16.5" 8tw to be finished...

I'm hoping Randy's numbers prove to be correct.

BTW, my 22" barrel sends the 125 TNT out over 2900fps.

 

[Bill Norris]

Per the Garmin my 23 inch barrel 1 - 15 Tw. runs 3006 FPS with the 125 gr. Nosler A B with the right powder.
(H-4198)

 

[jackieschmidt]

I just happened to Chronograph one of my 22 inch 30BR barrels last Saturday, (Garmin), and 36.0 grns of N130 gave an average 3070 fps with my 112.

 

[skeetlee]

It is possible if you know how to tune and read wind flags otherwise you cant