22 Royale ...yes I've created another Monster

[Shotafterdark]

Well
It seems I just can't sleep at night I lay in bed tossing and turning thinking about what the hell I could make
So I had this savage barrel I bought from somebody on this forum and it was chambered in 223 it is a 26 inch one and seven twist

I decided to go ahead and use that for an experiment
So this weekend my brother and I did our best to make that damn thing a shooter
That chamber was cut .007" out of concentricity from the bore

We had to line everything back up and cut a new chamber, first up was the 22 Creedmoor Reamer then I followed it up with the 204 Slingshot with a 22 caliber pilot on it

This effectively gave us 22 Creedmoor Case Street walled with the 42 degree shoulder

we cut a 5/8 24 thread on the muzzle and dropped a new FPM Spleen Splitter on it


So I rushed home today after work and fire formed a couple rounds with some old Winchester 760 and then I proceeded to load them up

Can you believe that piece of shit Athlon rangecraft would not give me a reading today of all days

LOL I guess I'll give it another shot tomorrow but I'm not going to push it like I did today with 50 grains we're gonna back it back down to 48 and leave well enough alone !!

 

[Shotafterdark]

And at the end of the day I am left wondering how fast was that little 62 grain hornady going we had to be right there at 4000 feet per second out of a 7 twist barrel and it made it to the target
I shot 5 times with that same load

 

[Shotafterdark]

 

[RegionRat]

Try moving the chronograph to within the instructions for distances to the bbl and muzzle.

It is hard to say from the video, but the first two tries looked too far down and the one when you moved it inside looked too far over.

If you move it a little closer to the muzzle and closer the to the bbl centerline, you have a better chance of picking up that little fast mover. Also, verify you have the correct settings for a rifle.



Also, I felt a little sorry for your chicken... LOL

 

[Webster]

Try moving the chronograph to within the instructions for distances to the bbl and muzzle.

It is hard to say from the video, but the first two tries looked too far down and the one when you moved it inside looked too far over.

If you move it a little closer to the muzzle and closer the to the bbl centerline, you have a better chance of picking up that little fast mover. Also, verify you have the correct settings for a rifle.

View attachment 1721985

Also, I felt a little sorry for your chicken... LOL

I taped a laser pen pointer to my barrel to line up the screens for my old Oehler Model 33 chrono. I taped a target to the first screen so I could see where the laser hit. A pain in the butt but it really got things lined up without shooting the detector screen. You can be way off lining the screens up by looking down the barrel. I quit using my chrono because it takes to long to set up and no-one is allowed to go in front of the benches during live fire. I cannot expect everyone to stop shooting for 15 minutes so I can set up. I have a lot of data acquired. So, I don't need to keep testing my favorite loads.

 

[RegionRat]

@Webster If I could, I would put a Garmin in your Christmas stocking for you.... I think you would like it.

These new ones are typically very easy, but even they have their limits.

I shot 5 times with that same load

I forgot to ask... How did they do in terms of group for you?

 

[Ackman]

Try moving the chronograph to within the instructions for distances to the bbl and muzzle.

It is hard to say from the video, but the first two tries looked too far down and the one when you moved it inside looked too far over.

If you move it a little closer to the muzzle and closer the to the bbl centerline, you have a better chance of picking up that little fast mover. Also, verify you have the correct settings for a rifle.

View attachment 1721985

Also, I felt a little sorry for your chicken... LOL

No surprise. I noticed that right away.

 

[Shotafterdark]

You know what you guys, I had it right underneath of the muzzle, initially
When I fired the first two fire forming rounds and had no problem

Hell Ive never had a bit of problem with that thing.Since I bought it..

I have my lab radar sitting down in the shop
I'll get a chance in another day or two on thursday or friday.To start shooting again and I will set both of them up


I set it outside the window because I thought somehow maybe pointing through the doorway was interfering with it.

She was grouping well inside of 3/4"
And I was bouncing around, I wasn't even trying to focus on accuracy.Just trying to get a dam.Velocity reading.

We will get it next time

 

[Shotafterdark]

Yes, settings were dialed in the quick session
Rifle
Speeds up to 5 thousand..

To be honest with you, I can't even get that little unit to take a firmware update with the app.

Kind of wondering right now, what the hell is going on

I took my little suppressed, twenty two Ruger pistol and fired a couple rounds
Over top of it that I didn't have on film and it was hit and miss with that.As well

 

[Shotafterdark]

I noticed the 69 gr eld vt bullets are out of stock at a lot of places.So I just caught midway with some in.I got five hundred on the way.

They literally have them shipped out the door on the way fifteen minutes after placing the order..

that

 

[Shotafterdark]

@Webster If I could, I would put a Garmin in your Christmas stocking for you.... I think you would like it.

These new ones are typically very easy, but even they have their limits.


I forgot to ask... How did they do in terms of group for you?

Lol
If I buy another chronograph, my wife would probably kill me

Besides, she doesn't know about the two cans.I have on order right now


Since i'm shooting so much 204 caliber stuff.I decided to get a couple twenty two caliber.Dedicated cans

The 10 ring AB Raptor with 5" reflex
And the exigent defense vanish 5.56

That will be my first
3d laser sintered titanium can.

Pretty much the latest high tech in can manufacturing .
The thing is only 6 inches and so far, all of the evaluations. I've watched have incredible decibel reduction ..

And since most of these barrels, i'm playing with now are mtu contour
I'm not too keen on turning down the profile and making them look ugly.In order to fit that reflex can over them

So I'll be hanging a can off the end of a twenty six to 28 inch pipe..
I better do my best to keep them small and lightweight

 

[RegionRat]

Bummer to hear about that chrono acting weird. That can be frustrating for sure.

I hope they get it worked out. Missing shots when doing load development work is a drag.

 

[Tim G]

We need to see some groups! 100 and 200. Not 25 or 30 yds PLEASE!

 

[Shotafterdark]

We need to see some groups! 100 and 200. Not 25 or 30 yds PLEASE!

Yep
It's on the roster ...

 

[danny]

Exactly what I thought of when I saw the first post...

Danny