20BRAI

[RegionRat]

Well done Gabe! For not being active all the time, you placed very well.

 

[Gabe22BR]

Short range barrel-
This @ 200yds…
Winds 7-15mph switch as heck !!!
Tomorrow it’s gonna be 330yds…

 

[Gabe22BR]

Barrel is for a good friend, only my reamer was used..

 

[Gabe22BR]

100yd
Different seating depths same winds !!!!

 

[TroyG]

What barrel manufacturer? I assume 1/9 twist? Thanks for posting.

 

[Gabe22BR]

Krieger 1-9”
21”
LV

 

[TroyG]

Nice rig! I tried RL15 in my Bartlein 8.5 to 8 gain twist. Lots of variables with powder and barrels but I can't get safely past 29 grs RL 15. N550 is my go to. 32 grain Fed 205m for 3700fps.

 

[Gabe22BR]

Yes, RL15 has to be tuned in the variables, temp, humidity, density.. I haven’t tried the N500 series powders, it’s like playing with fire also.. I tried to stick to single based powders .

Nice velocity Troy, I bet it knots them up !!!

 

[L.Sherm]

Bumping Gabes thread up, went out this morning and shot some loads for forming brass for my 20BRA that I have shot at 325 that shot well. Bought a new Arken scope that I mounted on it and shot at 100 got it close needed to finish my seating depth test on my 6 creed so I brought the 20BRA along figured what tge Hell. I have a spot I shoot at 665 yards here is the results.
Don't need no stinking Cream of Wheat or Beeswax lol.

 

[RegionRat]

Bumping Gabes thread up, went out this morning and shot some loads for forming brass for my 20BRA that I have shot at 325 that shot well. Bought a new Arken scope that I mounted on it and shot at 100 got it close needed to finish my seating depth test on my 6 creed so I brought the 20BRA along figured what tge Hell. I have a spot I shoot at 665 yards here is the results.
Don't need no stinking Cream of Wheat or Beeswax lol.

Very nice. Is this with the 55 Berger or other?

 

[L.Sherm]

Very nice. Is this with the 55 Berger or other?

Yes sir 55 Berger 3G 9 twist barrel

 

[Gabe22BR]

I been playing with N202 powder… in a few things.. shows promise

 

[L.Sherm]

I finally found a pound of 15.5 at my local LGS I'm gonna give it a try again, this time little more serious attempt, about 3 years ago it showed promise

 

[7315br]

Bumping Gabes thread up, went out this morning and shot some loads for forming brass for my 20BRA that I have shot at 325 that shot well. Bought a new Arken scope that I mounted on it and shot at 100 got it close needed to finish my seating depth test on my 6 creed so I brought the 20BRA along figured what tge Hell. I have a spot I shoot at 665 yards here is the results.
Don't need no stinking Cream of Wheat or Beeswax lol.

Super group, Sherm. WOW!!

 

[Gabe22BR]

MSSA had a double club match today- the 20BRAI put on a show..

I came in 2nd on both- due to fumble a few rds…
We had some wind…it wasn’t too bad
On the bright side- it’ll put a hurt on some 6.5mm & 6 mm rifles-…
I’m not on FB.. so …

 

[Hal]

Wow Gabe you know how to shoot that thing. Great job.

What powder are you using? 55 gr Bergers correct?
Hal

 

[RegionRat]

Well Done Gabe!

 

[Mulligan]

MSSA had a double club match today-
I came in 2nd on both- due to fumble a few rds…
We had some wind…it wasn’t too bad
On the bright side- it’ll put a hurt on some 6.5mm & 6 mm rifles-… View attachment 1657621

Holy Smokes!!!!!!

That's awesome Gabe!!!
Nicely done!

CW

 

[Gabe22BR]

had a 1.44575” 8 target agg- measured with enough space as to not cheat anyone between holes-

 

[17VLD]

Wow Gabe you know how to shoot that thing. Great job.


Hal

If it's got a trigger and a firing pin Gabe can shoot it well!
I've shot a 20 Dasher and a 6 Dasher side by side at 600 yards and that right there is super impressive especially when you consider it's a 55 grain 20 caliber bullet.
Matt