20 br with 55’s load data?

[Philly]

Anyone have any good load data and powder options for a 20 br shooting g the 55’s? Threw together a Howa mini recently with an 8 twist. Shoots the older 50’s nice but don’t have any and grafs has the 55’s available. Thanks!

 

[rickiesrevenge]

I used varget in mine. Work up slowly to 29. Some barrels pressure out at less

 

[doctorh]

Anyone have any good load data and powder options for a 20 br shooting g the 55’s? Threw together a Howa mini recently with an 8 twist. Shoots the older 50’s nice but don’t have any and grafs has the 55’s available. Thanks!

I have a custom 20 br with 26" brl. With 55 I have good accuracy with H 4350 & Reload 17. State a appox. 29.5 and work up in 3 tenth gr.

 

[L.Sherm]

Anyone have any good load data and powder options for a 20 br shooting g the 55’s? Threw together a Howa mini recently with an 8 twist. Shoots the older 50’s nice but don’t have any and grafs has the 55’s available. Thanks!

I would try the same powder you used with the 50's

 

[Philly]

I'd like to add to this question with the powders I have on hand. Accurate 2015, reloader 7, IMR 8208, Scott brigadier 4197 (I have multiple lbs of each of these)

 

[doctorh]

I'd like to add to this question with the powders I have on hand. Accurate 2015, reloader 7, IMR 8208, Scott brigadier 4197 (I have multiple lbs of each of these)

All of the powders that you listed are way to fast.Varget,reloders15 or slower powder.

 

[L.Sherm]

RL15 works wonders in my 20BRAI and 55's, I know of others that use it too.
With what you have on hand 8208 might work I know it does with lighter bullets in the BR case

 

[Gabe22BR]

RL 15- Varget RL 15.5
N135-N140-N150( maybe if use drop tube)

H4350 isn’t a good one- you can fill the case smooth to the top, crunch seat a bullet- it’s too slow-

 

[Philly]

Well, I had a small amount of varget on hand and didn’t want to start load development until I found more. $65 per lb! Holy moly! Hope my first load works. lol

 

[L.Sherm]

Well, I had a small amount of varget on hand and didn’t want to start load development until I found more. $65 per lb! Holy moly! Hope my first load works. lol

If you have AA2520 might be worth a shot in the BR case its not far off the RL15 when I tested both in my 20PPCAI.

 

[Dstaffk5]

N135 for me is bugholes. Makes prairie dogs fly

 

[JSH]

Do a search, there is a fair bit of data around. I went right to VV and didn’t fool with any thing else. I went with 150 and worked up, went like clock work and was a pure pleasure, almost boring.

 

[TroyG]

Varget, RL 15, RL 15.5, VV140, N540, VV150, N550. Lots of 20 BR and 20 BRAI discussion. Back down two or a grain and half on BRA loads.