17 Fireball

[AP2020]

I always wanted a 17 Remington, but I could never find one.

So, I have a 17 Fireball 19.5" Deadshot AR barrel coming next Thursday.

I have all the components and reloading dies assembled! I even found a used Wilson Inline seating die for $20 on ebay!

18gr Dead Hammer = groundhogs
19gr Hammer Hunter = coyotes

 

[rickiesrevenge]

Can you post a picture of the two bullets side by side?

 

[AP2020]

Can you post a picture of the two bullets side by side?

The 18gr and 19gr are identical in length.

The only difference is the depth of the hollow point.

18gr Dead Blow has a deeper hollow point and is designed for varmints.

19gr Hammer Hunter has a shallower hollow point and is designed to retain 73% of it's weight.

Steve Davis, owner of Hammer Bullets, killed 2 impala with the 19gr Hunter bullets using a 17 Hornet at 3,600fps.

I'll be conducting high speed slow motion video gel shots with both bullets.

Quickloads is predicting 4,000fps using IMR8208 XBR.

 

[AP2020]

1st Shots fired!

 

[TheCZKid]

Good video! Thanks. I've got a 17 Mach IV that soon I'm hoping to get shooting well, and that's cool you are shooing an AR version. Looks like it's working well.

 

[Bodhisafa]

Why do you have to crimp the bullet?

 

[AP2020]

Good video! Thanks. I've got a 17 Mach IV that soon I'm hoping to get shooting well, and that's cool you are shooing an AR version. Looks like it's working well.

Awesome!

Thank you

 

[AP2020]

Good video! Thanks. I've got a 17 Mach IV that soon I'm hoping to get shooting well, and that's cool you are shooing an AR version. Looks like it's working well.

I am experimenting with modding a Lancer 5 round magazine to get reliable feeding.

Gel shots video next Sunday!

 

[AP2020]

Why do you have to crimp the bullet?

It's a practice some folks use with the Hammer bullets.

 

[wkndwarrior]

Nice video, I've been on the fence between a DSB 17FB or a KAK 17-556. Did you order a matching bolt? What profile/gas configuration did you go with from DSB?

 

[AP2020]

Nice video, I've been on the fence between a DSB 17FB or a KAK 17-556. Did you order a matching bolt? What profile/gas configuration did you go with from DSB?

No, just a stock Odin Works bolt/big.

SOCOM, 0.750, Carbine

I have the magazine issue feeding just about figured out.

 

[450BM]

I use IMR 8208 in my 17 FB and 4000 fps is easy, heck 4300fps is easy…. Not that accurate though. 3650 fps is the sweet spot for 20gr Vmax and 20 gr Dogtown.

 

[WyleWD]

I always wanted a 17 Remington, but I could never find one.

So, I have a 17 Fireball 19.5" Deadshot AR barrel coming next Thursday.

I have all the components and reloading dies assembled! I even found a used Wilson Inline seating die for $20 on ebay!

18gr Dead Hammer = groundhogs
19gr Hammer Hunter = coyotes

Interesting.... What twist rate did you get on your barrel? Using 450 or 7 1/2 primers? WD

 

[AP2020]

Interesting.... What twist rate did you get on your barrel? Using 450 or 7 1/2 primers? WD

1:9
CCI 450