107 sierra MK

[kochie]

how are these bullet shootings in your BRs i know different rifles shoot differently with different bullets but how do they compare say to your berger bullets say like the 105 hybrid.

 

[Jeff Porter]

SMK 107 Berger 108 and 105 all group well in my rifle. I prefer the 105 due to better ballistics at distance.

 

[Bob3700]

The 107 SMK , sorted n pointed, is my go to bullet in my BRX. Have not found a better bullet out to 600 yds.
Willshoot as many Xs as y can hold.

 

[dusterdave173]

They shoot fantastic in my BR I have 8 twist 28 in Shilen barrel--I think IIRC freebore around .094 whatever Shilen sends out for James at Northern
Was not impressed until I jammed them--In the lands until they make a tiny square engrave on the bullet and Wow! They have been very impressive--I am using 30g Varget , 450 primer in lapua or Peterson brass--same results around 2820 -2850 depending on brass used.
I have not felt the need to even try any other bullet based on my current results--seating depth has been everything--Happy camper with 107 MK

 

[quest450]

are TomE, Alex's and Barts bullets that much more expensive ?
Why limit yourself and not explore your full capabilities ?

 

[padom]

Shoot excellent in my 28" Bartlein 6BR...

https://imgur.com/FDFms4G

 

[kochie]

Shoot excellent in my 28" Bartlein 6BR...

https://imgur.com/FDFms4G

ok thanks i just happened to have lots of the 107s & i'm putting together right now a 6 BRA so i will see how they do thanks again.

 

[Bill Norris]

Shot extremely well in my past 6BR and 6BRX. Planning to work with them with the new 6BRX as well.

 

[kochie]

Shot extremely well in my past 6BR and 6BRX. Planning to work with them with the new 6BRX as well.

what reamer are you using for your BRX

 

[Bill Norris]

what reamer are you using for your BRX

Sorry Bro, but I would not want to disclose that info unless my builder said it was O K.

 

[kochie]

Sorry Bro, but I would not want to disclose that info unless my builder said it was O K.

ok

 

[swd]

Sorted 107’s are a really good bullet, as good as anything. In the lands to where the engraving marks are square is the easy button..

 

[Idaho-Lefty]

107 gr. SMK's ( Lightly Jammed ) with, "Thrown Chg's" of, StaBall 65, ( Yup, I Hate Weighing Powder ! ) ,..
IS my, Steel Plinking Bullet, in my Poor Man's, Custom Rem 700, Criterion Barreled, 6 XC, and am getting, 5 shot, "Bug- Holes" in,.. the 2's and 3's ( 4's,. on, a Bad Day ! ). My 108 gr. Berger, Elite Hunters, are being Saved for, Deer / Antelope hunting,.. But they DON'T shoot, any better !

 

[kochie]

107 gr. SMK's ( Lightly Jammed ) with, "Thrown Chg's" of, StaBall 65, ( Yup, I Hate Weighing Powder ! ) ,..
IS my, Steel Plinking Bullet, in my Poor Man's, Custom Rem 700, Criterion Barreled, 6 XC, and am getting, 5 shot, "Bug- Holes" in,.. the 2's and 3's ( 4's,. on, a Bad Day ! ). My 108 gr. Berger, Elite Hunters, are being Saved for, Deer / Antelope hunting,.. But they DON'T shoot, any better !

ok thanks

 

[JEFFPPC]

They have won a lot of matches for me . I do sort them as I do everything. I have found no value in weighing. I sort ogive to tip into 3 lots. Then sort those lots base to ogive to .001.

 

[JFrank]

how are these bullet shootings in your BRs i know different rifles shoot differently with different bullets but how do they compare say to your berger bullets say like the 105 hybrid.

I’ll echo the post of @JEFFPPC , 107 smk always shot well for me

 

[kochie]

I’ll echo the post of @JEFFPPC , 107 smk always shot well for me

ok looks good shooting thanks good information

 

[SVT_Tactical]

My straight 6br shot them very well. I switched to 103s for a bit more speed but will not hesitate to load them up for a match if needed.

 

[kochie]

My straight 6br shot them very well. I switched to 103s for a year more speed but will not hesitate to load them up for a match if needed.

ok thanks

 

[Ranger188]

I feel the 107's are easier and have a wider tune window than some other bullets.
Don't get me wrong, the custom bullets are excellent, but for a factory go-to
bullet, hard to beat.