I bought a Mighty Armory decapping die a few years ago along with 2 different pins. They have a size that fits PPC brass. I have decapped 10,000+ cases & I have never broken a pin. I have even stuck a few burrowing a new flashhole on a severely plugged or off-center punched pistol case. Never a broke or damaged pin.I don't know who makes the best. But based on several recommendations, I bought the Mighty Armory decapping die for small flash hole brass and their pins.
The quality of it seems very high, but I've not actually used it yet and cannot comment on the durability.
I’ve yet to break a Redding on my Dillon 650...
Mighty Armory is pretty good also Squirell DaddyI am using Mighty Armory.
I used to make them at work for free. They are made from whats called drill rod. The rod comes in different diameters. 0.063" (1/16"). A foot long will make a lot of pins. I cut them with an abrasive cut-off wheel. See if you can buy the rod on line. Most machine shops would probably have some. How do you break a pin. They should bend without breaking.I'm running a Dillon 650. We go through a lot of pins. Yes I know the alignment needs to be accurate but we go through many .063 pins.
Looking to buy the best .063 de-prime pins available- who makes the best?
I have been using Mighty Armory decapper for a couple of years with NO failure. Tough dye and my opinion is it is exceptional.I'm running a Dillon 650. We go through a lot of pins. Yes I know the alignment needs to be accurate but we go through many .063 pins.
Looking to buy the best .063 de-prime pins available- who makes the best?
With the pin in the flash hole I loosen then tighten the nut on top of the die. Hopefully this centers the pin and locks it in place.I got tired of breaking the small flash hole pins on my Redding die, and ordered the Mighty Armory. I have decapped thousands of rounds with this die using a coax press, and have broken a total of 3 or 4 pins. It is still my favorite press decapping option, but their pins are not indestructable and can break.
You cannot break a pin if it is centered with the flash hole. It's hanging on a long rod.I got tired of breaking the small flash hole pins on my Redding die, and ordered the Mighty Armory. I have decapped thousands of rounds with this die using a coax press, and have broken a total of 3 or 4 pins. It is still my favorite press decapping option, but their pins are not indestructable and can break.