• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

20VT repeater

Installing the finial piece-
The SRS arca rail…IMG_7580.jpegIMG_7582.jpegit’ll be done.. till I get some Bib 40gr coated w/ WS2… then might try to find a load for them…ok got some doneIMG_7588.jpeg
 
Last edited:
Which CZ 527 did you start with? Which bottom metal/magazine is used as the donor?

View attachment 1591228
Gonna throw this out there-
I’m wanting a repeater in 20VT variants-

I wanting one to feed the case- from a magazine-

I read where one guy used a MDT/Acis mag- I call BS !!! - I have 3 varieties of 223 mags, w/ different lengths of mag lips, none feed the 221FB case- it pops out nose diving into the bottom of the barrel-on a custom SA Rem clone-

I can see the CZ 527 working (221FB version). Guessing that’s why Calhoon used them for his 19 builds…they feed.
Don’t know if a 223 version would or not w/o messing with the magazine

Now, I read where the Howa mini feeds the case.. don’t know if it’s with the factory mag or using a single follower- or some magazine modification required-….

I’ve had 3 Rem 221FB rifles..converted 1 to single shot, sold the others… so I’m not interested in the Rem at all…

I seen where 1 guy used a Howa mini & CZ bottom metal to get one to feed… so I guess anything is possible…

What would be your decision today- given the choices of current, available actions…???

Thanks, Gabe

I have several single shots… just wanting a repeater…so I’ll have to purchase the current setup to work this out…
I had a factory Remington 700 17 Fireball -- the VSF model (BDL). It fed great. I shot p-dogs with it for several years. You can occasionally find these on GunBroker. I later switched to a Kelbly Atlas (BDL style) and couldn't get it to feed from the magazine. I ended up putting a modified single shot follower in it and shoot it that way now. The factory 700 BDL on the fireball cartridges has a different follower, spacer, and the bolt had a different placement of the ejector, from what I recall. These parts are impossible to find -- at least when I tried to several years ago (the mag spacer and follower).

I shoot p-dogs with my Kelbly 17FB and actually prefer the single shot method.

Good luck. Post an update if you figure it out with the detachable mag.
 
Note: 221/222 mag vs the 223/204 mag


The 221FB /222 mag is .132” short in cartridge length- (221/222 mag vs the 223/204 mag) won’t fit the 221FB 222 bottom metal.

From the back of the follower difference is .432” between the 221/222 mag vs 223/204 mag

A spacer block would need to be added & the follower itself would need to be rebent- not sure on the spring…
 
My first 20VT was a single shot with a BAT SV action. I loved it so much I wanted a repeater. I used a Rem700VS in 223 and purchased a 17 follower and box. It feeds perfect but with Remington being all new not sure you can purchase the parts now.
 
My first 20VT was a single shot with a BAT SV action. I loved it so much I wanted a repeater. I used a Rem700VS in 223 and purchased a 17 follower and box. It feeds perfect but with Remington being all new not sure you can purchase the parts now.
Didn’t read the very first post did ya?….
I probably sold you that box conversion
 
A buddy has a CZ 527-223
We loaded up 4 rds in his mag, staggered them, trying to induce a malfunction. With no luck, it fed fine from the 223 magazine. So now he’s contemplating a 20vt on his action now….

It’s got me “ thinking “ maybe to sell my single shot cooper for another Mag feed CZ..or try a a Howa mini
 
A buddy has a CZ 527-223
We loaded up 4 rds in his mag, staggered them, trying to induce a malfunction. With no luck, it fed fine from the 223 magazine. So now he’s contemplating a 20vt on his action now….

It’s got me “ thinking “ maybe to sell my single shot cooper for another Mag feed CZ..or try a a Howa mini
Well Gabe saw this post and had to go try it. I have a cz lux in 223 I was thinking of turning into a 20vt. I loaded up the mag and every single one cycled perfect. I also staggered them and all 4 times I loaded the mag every single one cycled perfect.
In in the opposite boat though I’m leaning towards a single shot lol
 
Single shots are dime a dozen and require a 20-50rd box of ammo.. to keep up with..

Repeater, well ya already have 5 in the mag..no extra baggage to carry..
 
I have a CZ 527 in 221 fireball build by Bullberry rifle works about 20 years ago. Who would be a good smith for a 20vt rebarrel?
 

Attachments

  • Bullberry CZ 221 FB.jpeg
    Bullberry CZ 221 FB.jpeg
    155.8 KB · Views: 7
Interesting, I have 2 Sako 75 XS actions, they may have called them the (III), one is chambered in TAC20, the other in 223AI, I just put 4 dummy 221 FB rounds in the Sako box mag a they fed flawlessly into the chamber. I know you could buy that same size action in the 85, and potentially the 90 which Euro optic still has inventory.
 

Attachments

  • IMG_0747.jpeg
    IMG_0747.jpeg
    723.5 KB · Views: 9
Last edited:

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,190
Messages
2,191,112
Members
78,728
Latest member
Zackeryrifleman
Back
Top