I load 4.28” overall length 338 edge in my Lee classic turret and I tested my future 37XC in it successfully as well.
Building A ELR Rifle
- Thread starter jackieschmidt
- Start date
Where abouts is this?
Picture I posted above was out of Jacksonville/Buncom up the lil Applegate
Tillamook area.
jackieschmidt
Gold $$ Contributor
I e-mailed Schmidt & Bender, and got a prompt reply.Looks like the 2nd FP (M2F) is a new offering, both in cw and ccw. Maybe e-mail them and ask?
info@schmidt-bender.de
CW 860-911-62G-Q6-L9
10-60x56 CM II High Performance US P M2F-2MOA 1/8 MOA cw MT II / DT II+ | -3 to +2 | 5,6-1,0/0.22-0.04 | 90/3.54 | 4.42-0.75/13.3-2.3 | 2.5-0.43 | none | 442/17.40 | 10-60 | 34 mm | Ring mount | 56/2.21 | >90 | Adjustment range windage (internal) 53
The new riflescope for competition shooters. The new riflescope for all those who value maximum precision and accuracy. Whether Benchrest, F-Class or Long-Range, the new 10-60x56 CM II High Performance is ideal for competition shooting.Schmidt &…www.schmidtundbender.de
CCW 860-911-625-Q5-L7
10-60x56 CM II High Performance P M2F-2MOA 1/8 MOA ccw MT II / DT II+ | -3 to +2 | 5,6-1,0/0.22-0.04 | 90/3.54 | 4.42-0.75/13.3-2.3 | 2.5-0.43 | none | 442/17.40 | 10-60 | 34 mm | Ring mount | 56/2.21 | >90 | Adjustment range windage (internal) 53 M
The new riflescope for competition shooters. The new riflescope for all those who value maximum precision and accuracy. Whether Benchrest, F-Class or Long-Range, the new 10-60x56 CM II High Performance is ideal for competition shooting.Schmidt &…
"The riflescope was able to assert itself as a newcomer in the GB FT-R national team's test lasting several weeks against the already established products of other brands. The team will be competing with these optics at the 2026 World Championships."
The 10x60x56 CM11, 1/8 clicks, 2d focal plane is available in Germany. Let’s say with shipping and any tax, $5500.
I am going to contact rack of the big supplyers in country and see if when it will be available State Side…….
On Sale
How much available elevation does that scope have?I e-mailed Schmidt & Bender, and got a prompt reply.
The 10x60x56 CM11, 1/8 clicks, 2d focal plane is available in Germany. Let’s say with shipping and any tax, $5500.
I am going to contact rack of the big supplyers in country and see if when it will be available State Side…….
On Sale
jackieschmidt
Gold $$ Contributor
If I am reading their literature correctly, 86 minutes. The big Valdada has 100. Of course, that’s a 34mm tube in the S&B compared to a 40 in the Valdada.
How many minutes you figure you'll need in your rail to reach target and still be optically centered.
So 50 minute rail will keep ya centered
optically?
Even for a 34mm tube that’s kinda low but higher magnification scopes seem to have that trend.
I run a 45 moa rail and have 25ish mils available elevation with my scope(34mm) that gets me to 2400ish with the 338 and 2150 with the 7mm and I have a Charlie tarac for more when needed.
jackieschmidt
Gold $$ Contributor
Well, my Wife told me she would get me any scope I wanted for my birthday, which is Feb 5.
I am really leaning toward the Schmidt & Bender. I usually don’t think much about warranties, but theirs seems rock solid. And when you are forking out $5000 for a Conglomeration of aluminum and glass, the warranty just might mean something.
I am really leaning toward the Schmidt & Bender. I usually don’t think much about warranties, but theirs seems rock solid. And when you are forking out $5000 for a Conglomeration of aluminum and glass, the warranty just might mean something.
jackieschmidt
Gold $$ Contributor
This is the scope that has my attention. I like the reticle, the second focal plane, and the 1/8 clicks. The quality of the glass should be as good as anything I could purchase to handle the mirage at The TackDriver.
Anybody know anybody that has one.
www.eurooptic.com
Anybody know anybody that has one.
Schmidt Bender 10-60x56mm CM II High Performance US P M2F-2MOA 1/8 MOA ccw MT II / DT II+ Riflescope 860-911-62G-Q5-L7
FREE SHIPPING on Schmidt Bender 10-60x56mm CM II High Performance US P M2F-2MOA 1/8 MOA ccw MT II / DT II+ Riflescope 860-911-62G-Q5-L7
Last edited:
Kinda minimal available elevation but certainly good glassThis is the scope that has my attention. I like the reticle, the second focal plane, and the 1/8 clicks. The quality of the glass should be as good as anything I could purchase to handle the mirage at The TackDriver.
Anybody know anybody that has one.
Schmidt Bender 10-60x56mm CM II High Performance US P M2F-2MOA 1/8 MOA ccw MT II / DT II+ Riflescope 860-911-62G-Q5-L7
FREE SHIPPING on Schmidt Bender 10-60x56mm CM II High Performance US P M2F-2MOA 1/8 MOA ccw MT II / DT II+ Riflescope 860-911-62G-Q5-L7
R.Morehouse
Gold $$ Contributor
I have been using the Vortex Gen 3 Razor 6-36x56 paired with the Burris XTR Signature Rings. The scope has 120moa elevation and the rings give me another 40moa. This setup has been dependable on my 338.
Regards
Rick
Regards
Rick
jackieschmidt
Gold $$ Contributor
First operation, opening up the Bat M Bolt Face for 338 Lapua case head.
This pretty straight forward.
I faced about .002 off the face to get it perfect as well.
Next will be installing the Sako Extractor on the bottom to work with the drop port. Then I can chamber the barrel
This pretty straight forward.
I faced about .002 off the face to get it perfect as well.
Next will be installing the Sako Extractor on the bottom to work with the drop port. Then I can chamber the barrel
Chris kloster
Silver $$ Contributor
Myself I have an itch for a 33XC
jackieschmidt
Gold $$ Contributor
I chambered the barrel tonight with the 338 Ackley Imp, then throated to to fit the 300 grn Berger.
I have no idea how long this throat is, it’s way out there.
Here is the 300 Berger seated in a case with the shank to boat tail junction around .090 from the neck shoulder junction. This is the bullet in the lands.
I figure it will lengthen after break in, so this looks about right.
Thanks to @moondog for the loan of the reamer and throater.
I have no idea how long this throat is, it’s way out there.
Here is the 300 Berger seated in a case with the shank to boat tail junction around .090 from the neck shoulder junction. This is the bullet in the lands.
I figure it will lengthen after break in, so this looks about right.
Thanks to @moondog for the loan of the reamer and throater.
Last edited:
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.