It’s not a high volume shooterBetter get feel for it- search 20-250…. For loads& velocity & barrel life…![]()
It’s not a high volume shooterBetter get feel for it- search 20-250…. For loads& velocity & barrel life…![]()
I too had issues with terminal performance of the Bergers and Hornadys albeit out of my 22-250AI and in the 75gn range at 3400fps. Blow ups at close range and pencil through at longer ranges. I switched to the 51g HHTs and have been very happy with them. Run them at 4050fps and I’ve shot coyotes from 45-400 yards with them and performance has been great. Also shot a whitetail doe the other day at 175yrd quartering away. Broke through the ribs on close side, destroyed heart and lungs and punched through the far side shoulder with a dime size exit hole. I was very very impressed for a 51gn bullet. Give the hammers a try I think you will be impressed. I’m using an 8twist so the rpm’s are up there.Super accurate but not super consistent in the terminal dept on coyote for me.
I don't shoot long range with my 20-250, so I'm going to give the Hammer 41Gr HHT's a try and see if I can up the terminal effects a bit.
SJC
Out of curiosity, how close are the case capacities on the GT and the xx-250 cases?Better get feel for it- search 20-250…. For loads& velocity & barrel life…![]()
You can search it here, several good threads on them both, loads, velocities, bullets used, brass used…Out of curiosity, how close are the case capacities on the GT and the xx-250 cases?
About 1 grain of H20, the research i did awhile back said Lapua GT brass was 43.3 and 22-250 was 44.5Out of curiosity, how close are the case capacities on the GT and the xx-250 cases?
Reamer just arrived, I’ll be joining in the fun by summer!I just put together a 20GT. Will be working up loads this next week.
The berger 55gr is the big “why“ big 20 cals get built. Run the ballistics on that pill at 3800 and pay special attention to it’s ability to buck wind.
What did JGS come up with freebore?Reamer just arrived, I’ll be joining in the fun by summer!
It’s not a high volume shooter
order 55gr Bergers from Graf’s if you don’t have themReamer just arrived, I’ll be joining in the fun by summer!
I have 2500 of them on hand, bought them when they were being discontinued knowing I’d build a fast 20 at some point. Didn’t know Grafs has them, I’ll probably buy a few more. Thank youorder 55gr Bergers from Graf’s if you don’t have them
Good question, Reamer showed up Old Dominion Custom Rifles last week, I’ll ask Zack and get back to you.What did JGS come up with freebore?
Just curious.Good question, Reamer showed up Old Dominion Custom Rifles last week, I’ll ask Zack and get back to you.
Grafs talked Berger into another run of them.I have 2500 of them on hand, bought them when they were being discontinued knowing I’d build a fast 20 at some point. Didn’t know Grafs has them, I’ll probably buy a few more. Thank you
Thx for the tip, I went ahead and ordered more. Get them while you can kind of thing.Grafs talked Berger into another run of them.
It was a April Fools. But Im sure someone would try it.What kind of velocity do you suppose we may get out of this if we neck it down to .14 cal?
Reamer print secured, lol.What did JGS come up with freebore?
0 FB - pretty much the same as my Manson reamer.Reamer print secured, lol.
The Precision Throaters (PTG) that 4D rents work well. I expect that I may want more FB with the blackhole 52 and 60gr.0 FB - pretty much the same as my Manson reamer.
Is it for the 55's?0 FB - pretty much the same as my Manson reamer.