Summarize your load development

[Lucky Shooter]

Much good stuff posted for you.

I might add----reinforce your ability to think for yourself--don't be reluctant to accept
that your ideas weren't good----as the man says, test things yourself.

Treat your mentor well---if you're lucky enough to find one.

Enjoy the challenge----never quit learning.

A. Weldy

 

[INTJ]

I really don't know but 1 person here, personally. And he is an immensely successful shooter. I've gleaned much from him, But he's a busy guy and really doesn't ahve time to mentor me. SO your last question stands. That's the question I'm asking. My usual way of deciding who makes the most persuasive case is who can back it up with facts, logic and science. My bad, I guess..... lol

I have taught many students how to fly jets. This is way more demanding and consequential than any shooting sport. The most successful way is to give the student a couple of different methods to accomplish a given task, then have them go do it and figure out what works best for them. There is no short cut to "go do it."

Analysis and theory are one thing, actual results are another. Some personality types are so wrapped around theory and analysis that they never do anything. We don't need to have everything 100% figured out before we start.

BTW, no one here cares if you are persuaded or not. Many of us have taken a lot of time and told you what actually works. Theory varies on why, and we are a lot better on what works be why. If that bothers you then perhaps the shooting sports aren't for you.

 

[garandman]

Many of us have taken a lot of time and told you what actually works.

And alot of it conflicts. Leaving me unsure of who to listen to. So I evaluate each on who makes the most persuasive case, rather than just their assurances they are the rightest. Don't take offense. None is intended.

 

[garandman]

At this point.... thanx everyone for everything.

I'll go back thru and review it all.

Thanx again. Carry on.

 

[INTJ]

And alot of it conflicts. Leaving me unsure of who to listen to. So I evaluate each on who makes the most persuasive case, rather than just their assurances they are the rightest. Don't take offense. None is intended.

You still don't get it. GO DO IT. That is the only way to know. There is not just one right answer.

 

[jimmymac]

You can lead a horse to water…

 

[garandman]

You can lead a horse to water…

Ya know...Im not gonna return the insult... that I'm as dumb as some barnyard animal.... simply cuz I like to know how things work. Forget The multiple times I explain I just can't go around trying every single theory on here and burning up my barrel. But Im gonna let it pass.

You have a good day, ok ?

 

[JFrank]

I suppose when a fella asks 50,000 people for their opinion it could get a little overwhelming.

I talk to myself alot

 

[Mark W]

I suppose when a fella asks 50,000 people for their opinion it could get a little overwhelming.

I talk to myself alot

You too?

 

[garandman]

Some interesting take-a-ways / changes for me to try :

1. Find a good seating depth first, before powder charge. I always did other way round.

2. Test powder starting at max charge. That way you find a max velocity asap. Not sure why I always worked from mid-level charge and worked up. Kinda dumb of me... guess I was looking for pressure.

3. Whidden hydraulic forming dies look really interesting... to save time, components, money, range trips, bbl life, etc ... or even DJs Brass Service.

Still not sure of the effectiveness of ladder / OCW methods. Gotta study them more. Testing at more than 100 yd will be problematic due to range access / knee injuries.

 

[jimmymac]

Ya know...Im not gonna return the insult... that I'm as dumb as some barnyard animal.... simply cuz I like to know how things work. Forget The multiple times I explain I just can't go around trying every single theory on here and burning up my barrel. But Im gonna let it pass.

You have a good day, ok ?

It wasn't meant as an insult, but I'll man up and apologize since you were offended. Thing is, I'd say the same to you in person. When a guy comes on here or any big forum for that matter and asks a question, he's obviously going to get advice that ranges from great to forget about it. He's also going to get advice from shooters of different disciplines who tend to do things differently to achieve a good tune and the corresponding result on their target paper. More than one way to skin a cat.

I'm an inquisitive guy too, but I try not to end up too far in the weeds. This doesn't have to be rocket surgery. Example, I really like music. I listen daily on my two channel setup. I can completely enjoy the music without knowing how my music streamer feeds info to my amp with the end result being sweet sound coming out of my speakers.

The absolute best advice I've seen in this thread is to find a willing person of some repute that has been around the block you are trying to navigate. That is the complete and total shortcut to get from point A to point B. You will come up to speed quickly, and from there you can tweak things to suit your own style. I'm still a hack, but I now occasionally have my day in the sun because I shoot all the time and have benefitted from the advice of some respected shooters who were willing to help me at the range. YMMV

 

[Stan Taylor]

Preacher enough is enough.
I have eaten all the popcorn and barbecue chicken I can stand.
You have my phone number and you’re only about an hour from me, so get in touch with me and I will tell you what to load. Don’t seat any bullets just turn them upside down and bring your seater die.
Use your .266 button.
We can start about 10 am tomorrow at my range I think you’ll walk away with pretty good prospective.

 

[garandman]

@Stan Taylor ... thanx. Today thru Sunday are locked down here. Monday is possible. I'll call ya.

 

[Stan Taylor]

@Stan Taylor ... thanx. Today thru Sunday are locked down here. Monday is possible. I'll call ya.

We’ll you can be at my work about 3 pm and follow me home and we will have a couple hours to play with some stuff.
Not being nosey what are ya lockdown for.

 

[garandman]

Not being nosey what are ya lockdown for.

Schedule is chock full. I honestly think 90% of what I have questions on we can handle over the phone. With your permission let me just call you today. I appreciate your kind offer.

 

[Stan Taylor]

You can call me at Douglas about 1 o’clock on till 3 pm.

 

[dellet]

What a great chance to sit and learn from a very knowledgeable source.

All I can offer after reading through this and other threads, is to arrive with an empty tea cup.

 

[BartsBullets]

Some interesting take-a-ways / changes for me to try :

1. Find a good seating depth first, before powder charge. I always did other way round.

2. Test powder starting at max charge. That way you find a max velocity asap. Not sure why I always worked from mid-level charge and worked up. Kinda dumb of me... guess I was looking for pressure.

3. Whidden hydraulic forming dies look really interesting... to save time, components, money, range trips, bbl life, etc ... or even DJs Brass Service.

Still not sure of the effectiveness of ladder / OCW methods. Gotta study them more. Testing at more than 100 yd will be problematic due to range access / knee injuries.

Don’t forget to wear eye protection!

2. If not a misprint, Is possibly the dumbest and most dangerous thing I’ve ever read on this board, and I’m sugar coating it.

Bart
If you’re serious about getting better call me at Barts Custom Bullets 270-eight seven nine- 42 seven nine. You may have to leave a message but I’ll call you back.

 

[Ccrider]

Do you have any clue who is giving you recommendations? What their qualifications are? Pick someone that is at the top of whatever discipline you want to shoot and listen to them. Figure out a method. Great shooters are not scientists. They are shooters. I know a lot of engineer types that are really smart but can’t get past the “why” and shoot like crap.

Reading through this threat I’ve read some really good advice and some not so good.
Now how can you figure that out?

Please point out the bad advice. A few of us will listen and heed the warning. The rest are destined to travel the low road on Darwin’s pass.

 

[JFrank]

Please point out the bad advice. A few of us will listen and heed the warning. The rest are destined to travel the low road on Darwin’s pass.

Too late..Ive already deleted most of my bad advice posts.