• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Fur friendly 6mm bullet in the 80gr to 95 gr. Range

Plumsask

Just looking for any experience and advice on a fur friendly bullet in .243/6mm for my 6mm Ackley. I Developed a load for my 6mm ackley using a 90 gr. Tipped game king and H4831sc. Its been a very accurate and consistent load with low e.s. and s.d. at 3500 FPS, having said that I know its a fairly high velocity. The tipped game king leaves some pretty large exits ( even when not hitting dense bone). Can anyone suggest a better bullet? Anyone have experience with the 90 gr. Scenar? Or any of the 95gr barnes LRX? Any help is appreciated.

Ave
 
Bill K said:
Find some solid FMJ's or brass bullets.
Click to expand...
Seems most manufacturers have discontinued their FMJ's....sierra and speer use to have 90 grain FMJ but are all discontinued. When you say brass bullets are you referring to barnes or other monolithic bullets?
 
Plumsask said:
Just looking for any experience and advice on a fur friendly bullet in .243/6mm for my 6mm Ackley. I Developed a load for my 6mm ackley using a 90 gr. Tipped game king and H4831sc. Its been a very accurate and consistent load with low e.s. and s.d. at 3500 FPS, having said that I know its a fairly high velocity. The tipped game king leaves some pretty large exits ( even when not hitting dense bone). Can anyone suggest a better bullet? Anyone have experience with the 90 gr. Scenar? Or any of the 95gr barnes LRX? Any help is appreciated.

Ave
Click to expand...
A stout big game bullet like the 85 Grain TSX or a 100 grain Partition work pretty well on coyote fur. I've used both with a vanilla 243 and the damage is not bad. They expand enough for quick kills too. Not like FMJ's, that seem to create runners when shot. Both, the TSX and NPT will almost always leaves two holes but manageable if sewing is needed. Fringe hits and bad angles will still leave a mess, but many bullets will do that.
 
Plumsask said:
Just looking for any experience and advice on a fur friendly bullet in .243/6mm for my 6mm Ackley. I Developed a load for my 6mm ackley using a 90 gr. Tipped game king and H4831sc. Its been a very accurate and consistent load with low e.s. and s.d. at 3500 FPS, having said that I know its a fairly high velocity. The tipped game king leaves some pretty large exits ( even when not hitting dense bone). Can anyone suggest a better bullet? Anyone have experience with the 90 gr. Scenar? Or any of the 95gr barnes LRX? Any help is appreciated.

Ave
Click to expand...
The Sierra #1515 80 grain Biltz Varminter bullets has been fur friendly for myself out of a 6x45 bolt gun at 3000fps.
 
RussellJ said:
The Sierra #1515 80 grain Biltz Varminter bullets has been fur friendly for myself out of a 6x45 bolt gun at 3000fps.
Click to expand...
I may have to look at backing down the speed, its a shame to build a hotrod and then drive it like a Sunday grocery getter!
 
From Sierra Bullets website:

6MM .243 CALIBER 80 GR. BLITZ SBT​


In rifles chambered for either the 6mm Remington or 243 Winchester cartridge, this 80 grain #1515 Blitz bullet is dependably frangible and has no peer as a varmint bullet at velocities delivered by these cartridges. The Sierra Spitzer boat tail shape assures a flat trajectory, good resistance to crosswinds and vertical winds, and high-energy delivery even at extreme ranges. Built at the request of numerous varmint shooters, this bullet will bring out the best in both a shooter and his rifle for all varmint hunting applications.
 
RussellJ said:
From Sierra Bullets website:

6MM .243 CALIBER 80 GR. BLITZ SBT​


In rifles chambered for either the 6mm Remington or 243 Winchester cartridge, this 80 grain #1515 Blitz bullet is dependably frangible and has no peer as a varmint bullet at velocities delivered by these cartridges. The Sierra Spitzer boat tail shape assures a flat trajectory, good resistance to crosswinds and vertical winds, and high-energy delivery even at extreme ranges. Built at the request of numerous varmint shooters, this bullet will bring out the best in both a shooter and his rifle for all varmint hunting applications.
Click to expand...
Thank you- I have never read this before- now I will have to give them a try! Much appreciated.
 
Excessive speed is the enemy! I have tried many, many combinations over the years. One of the best I found was an 87 V-max at around 3000 fps. Quite a few clean kills over 500 yds. And they still expanded nicely at that distance. Usually about a one inch exit. Up close many do not exit, for a great hide. A fine line between good and a bomb! FMJ is not the answer, many will run to the next zip code! Never to be seen again.

Paul
 
Just one man’s opinion but if I was using one of my 6mm rounds pushed fast and I was trying to save pelts, I wouldn’t be using one of those heavy bullets. I would be pushing a light varmint bullet (60 - 75 grains) fast to expand and stay inside the varmint. Wouldn’t waste my time on anything with a fmj.
Gary
 
You must log in or register to reply here.

Similar threads

best 6mm varmint bullet in 8 twist
2
Replies
29
Views
4,470
David Milisock
6MM Sierra Game Changer loads in the 6X47 Lapua
Replies
1
Views
692
Patton243
6mm creed 105 Gr bullets with H4831SC?
Replies
16
Views
4,659
lb-ft

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,283
Messages
2,215,625
Members
79,516
Latest member
delta3

Share This Page

Back
Top