After Market Target Turrets
- Thread starter jpretle
- Start date
Dusty Stevens
Shiner
I have some leupold made that fits the coin slot type hunting scope adjustments.
Dusty Stevens
Shiner
They look like the m series not a target turret with a cap. They are on their website with the other accessories
http://forum.accurateshooter.com/threads/cost-to-convert-leupold-scope-to-target-knobs.3960180/
Take a look at this thread if you are looking for ones for a leupold. It has pics and all the details about the s1 dials from leupold that are diy.
Take a look at this thread if you are looking for ones for a leupold. It has pics and all the details about the s1 dials from leupold that are diy.
Bill Norris
Back in the Day
Does anyone know if the old "Stoney Point" adjustment knobs will fit on the newer finger style knobs that are on the Vx 3i models ?
Do your turrets look like the top one in this picture?
Attachments
Bill Norris
Back in the Day
Windage does but Elevation is the Custom Dial System Turret and it does not.
I dont have the Stoney Point turrets but I do have the Leupold S1 dials and I believe they both mount the same way from the pictures I have seen. That plastic cap on your windage turret should pop off and the S1 dials install right on. If the Stoney Point ones mount the same way then I can't see why they wouldn't work. But that will only work for your windage. For your elevation you would have to get a custom CDS cap made from leupold or maybe aftermarket like Kenton Industries if you dont like the standard CDS cap.
Bill Norris
Back in the Day
I would call Leupold custom shop just to verify.
jpretle
Gold $$ Contributor
Well Dusty, I found the CDS dials, but sure could not locate any others.
Will try calling Leupold, for additional info.
Dusty Stevens
Shiner
I just received one of the Leupold S1 screw on elevation dials. Fits all VXIII and VX3 scopes with the slot. The little plastic finger caps comes off like in the picture above. Use a bottle cap opener gently, pops right off. The S1 dial is not on the website. You have to call and ask for it. They can also custom engrave them like the CDS with load data if you choose. I ordered one and with 1/4" click marks and received it in just under two weeks. $80. Quality is superb. I have yet to shoot it to test the click/markings but I have no doubt that it will work.
Last edited:
You have to call the leupold custom shop and ask for them (S1 dials for MOA or S5 dials for MIL).They dont list them online or advertise them. It's almost like they try to keep them a secret.
Dusty Stevens
Shiner
Its so they can put those $250 turrets on em
Dusty, you're exactly right. I was quoted $230 plus tax, to send a vx2 in and get the elevation turret changed. That's only for the elevation. I still have the email. Just checked it to make sure I had the right price. I dont know what the wait time would be on that either. I ended getting the S1 dials from them and it was only $150 for both the elevation and windage ($75 each) including shipping.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.