• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Teslong Apple Compatible bore scope thread (WiFi)

wang243

wang243

Thought it might be helpful to start a thread that is based on the NTG100W bore scope that is Apple compatible. Hopefully it will keep the threads separated and cut down on searches for information on the bore scope you are interested in.
 
Received mine last week and found that the manual was printed on a small sheet of paper. Out came the magnifying glasses that I used to read very small print with and wala, instant satisfaction.
Had to down load the WiFi Image app from the Apple app store (free) on to my IPad and then followed directions in the manual and was looking down my new 6PPC barrel shortly there after.
Played with the focus by adjusting the mirror's position until I got a nice clear picture which I saved. I then did a slow video from the chamber to the crown and saved that. To bad that it will never look like that again after tomorrow.
To help keep the mirror centered in the bore I used some blue painter's masking tape rapped around the cable near the mirror end until I can find some small o rings.
 
Thanks for letting us know it’s in. I learned about this product last week and emailed the company today to see when available. So, thank. Got one ordered before they are gone
 
wang243 said:
Received mine last week and found that the manual was printed on a small sheet of paper. Out came the magnifying glasses that I used to read very small print with and wala, instant satisfaction.
Had to down load the WiFi Image app from the Apple app store (free) on to my IPad and then followed directions in the manual and was looking down my new 6PPC barrel shortly there after.
Played with the focus by adjusting the mirror's position until I got a nice clear picture which I saved. I then did a slow video from the chamber to the crown and saved that. To bad that it will never look like that again after tomorrow.
To help keep the mirror centered in the bore I used some blue painter's masking tape rapped around the cable near the mirror end until I can find some small o rings.
Click to expand...
A Harbor Freight O-Ring selection for about $8 may work.
 
wang243 said:
Received mine last week and found that the manual was printed on a small sheet of paper. Out came the magnifying glasses that I used to read very small print with and wala, instant satisfaction.
Had to down load the WiFi Image app from the Apple app store (free) on to my IPad and then followed directions in the manual and was looking down my new 6PPC barrel shortly there after.
Played with the focus by adjusting the mirror's position until I got a nice clear picture which I saved. I then did a slow video from the chamber to the crown and saved that. To bad that it will never look like that again after tomorrow.
To help keep the mirror centered in the bore I used some blue painter's masking tape rapped around the cable near the mirror end until I can find some small o rings.
Click to expand...
i have found that using the phone is easier than using a magnifying glass.. just use the camera and zoom in..
 
Oops. Thank you. My bad. I looked earlier and it said sold out and I had the link saved because people have been PMing me for the link.
 
I bought one of the older, non-Iphone compatible units about a month ago, and got so much reflection glare off the bore that it rendered the thing nearly useless. I'm in the process of returning it to Amazon now for that reason. Has anybody else had this problem? I never found a way to get rid of it. The only adjustment I know of is the brightness of the light in the tip. I'd really like to get one of the wifi versions if it doesn't have this problem. From the pictures posted I seem to be the only one having this problem. I suppose it's academic since Amazon is out of them and won't say when or if they'll have them again.

Teslong's web site shows them, but their price is $75 and their site doesn't say whether or not they have any either.
 
Jdne5b said:
Anyone know if the wifi version has the same warning about coiling it up?
Click to expand...
It comes in a bigger box so it is not coiled up as tight from Teslong so I would assume it’s the same the cord looks slightly different but I’m not gonna coil mine up and find out
 
Lesloan said:
I bought one of the older, non-Iphone compatible units about a month ago, and got so much reflection glare off the bore that it rendered the thing nearly useless. I'm in the process of returning it to Amazon now for that reason. Has anybody else had this problem? I never found a way to get rid of it. The only adjustment I know of is the brightness of the light in the tip. I'd really like to get one of the wifi versions if it doesn't have this problem. From the pictures posted I seem to be the only one having this problem. I suppose it's academic since Amazon is out of them and won't say when or if they'll have them again.

Teslong's web site shows them, but their price is $75 and their site doesn't say whether or not they have any either.
Click to expand...
Stupid question but have you tried to adjust the power of the light? There’s an adjustment on the cord itself. May help you.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,226
Messages
2,213,862
Members
79,448
Latest member
tornado-technologies

Share This Page

Back
Top