Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The OP is talking about the 6mm/.243 110SMKCheap and very accurate in my rifle. Performed poorly on hogs had to shoot each hog multiple times. In fact I almost sold my 6.8 they performed so poorly on hogs.
These bullets have been hard to get shooting in my 6BRA 1/7.5 Twist. Have some groups that start at point of aim then a flier then third shot will go into first hole fourth into second and then more random fliers. Shot a group tonight with them where shots 2,3,4 all went into the same hole and shots 1 and 5 were fliers about 3/4 at 4:00 and 10:00 of the group. Weird.
They shoot great in my 7.5" BRA with 4895 but they don't like to go fast in it. 2800 even .010" off is where I'm at. With the high BC they still hold up well at long range.These bullets have been hard to get shooting in my 6BRA 1/7.5 Twist. Have some groups that start at point of aim then a flier then third shot will go into first hole fourth into second and then more random fliers. Shot a group tonight with them where shots 2,3,4 all went into the same hole and shots 1 and 5 were fliers about 3/4 at 4:00 and 10:00 of the group. Weird.
They shoot great in my 7.5" BRA with 4895 but they don't like to go fast in it. 2800 even .010" off is where I'm at. With the high BC they still hold up well at long range.
I get it, sometimes it's time to throw in the towel...Yeah I saw your post above. Ive tried two different powders and several charge weights and gone from 15 thou jammed to 40 thou jumped with nothing stellar and nothing repeatable. I want them to shoot but I'm about to bail on them.
Bartlein 1/7.5 5RI get it, sometimes it's time to throw in the towel...
Who's barrel? Mines a 237 Krieger 4 groove
They shoot great in my 7.5" BRA with 4895 but they don't like to go fast in it. 2800 even .010" off is where I'm at. With the high BC they still hold up well at long range.
My barrel seems a little slow, I hit pressure around 2920 or it just might be a slow lot of 4895. But it is accurate.How fast did you take them, I was hoping for an other node.... jim
My barrel seems a little slow, I hit pressure around 2920 or it just might be a slow lot of 4895. But it is accurate.
I haven’t checked the seating depth since the initial load development. It only has about 300 rounds through it since then. I only shoot F class and while I like the case and it’s very accurate it doesn’t do anything for me that my BRX’s don’t do better for F. I can get 3000+ with 110’s and RL16 with sub X ring accuracy in the BRX.It should have hit a higher node up that far. How much have moved on seating depth? jim
I've shot the Hornady 110gr. ATIPs out of my 6BRA. .010" off the lands and with 30.5 of H4895 was getting 2822fps with a ES of 18 and a SD of 8. Just shot ragged holes. Wish I had more than 22 of them at the time.
I've got some 110SMK and that is the next thing to load up and shoot.
The 107smk shoot excellent as well as the 105's.
My barrel is a 7 twist.
Later, Frank
Bartlein Barrels