6 BRA 1-8 t h4895 68 bullet

[Link]

Not having great success with the 104 - 108 class bullet so I want to try a lighter bullet.
I saw a post on this and can't find it now. Can someone help me out posting there favorite load using these components.
thanks Don

 

[BartsBullets]

If you have a chronograph try running them between 3350 and 3400. Not a load but a good starting place.

Bart

 

[Link]

Thanks Bart. I saw a few loads posted a while back and now I can't find them [ yup used search ]. I would like a good starting point if no one has any chocolate icecream :}
thanks

 

[Link]

Can't anyone give me a good starting point as I don't have a range nor time to start at the bottom testing. I have some Bart 66 ultras to start with. Or should I abandonee the idea ?

 

[Mark W]

Can't anyone give me a good starting point as I don't have a range nor time to start at the bottom testing. I have some Bart 66 ultras to start with. Or should I abandonee the idea ?

Most everyone with 1:8 twist is probably throated long and happily shooting 105 class bullets.

My 1:12 twist shoots ragged holes with every bullet between 55 and 70 grains and I’ve tried, but it’s also set up with 0 freebore.

Personally I would try H322 or H335 with those lighter bullets. Your seating depth options will likely be limited to a pretty long jump but that doesn’t necessarily mean it won’t shoot.

Good luck!!

 

[DBLNUT]

Not having great success with the 104 - 108 class bullet so I want to try a lighter bullet.
I saw a post on this and can't find it now. Can someone help me out posting there favorite load using these components.
thanks Don

Try Bart’s 80 Dominator, 31.6 to 32 grains of 8208 at + 6-12.