• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

One Component Change! Which one?

What size is the group at a 1000 yards I don't know what size target your using?

Joe Salt
The group size and target size are on the screen shot: 1st target-1.97moa,2nd-0.59moa,3rd-0.50moa. All are on the NRA Long Range FC at 1,000 yds
 
I just realized I have the 2 and 3 strings reversed so the middle string was last and the one where I had the target face issue.
 
So which primer did you use first and then change to?
My go to primer use to be the Commie white/red box or Wolf. A good friend/champion shooter told me about the S&B primers and how it would cut my SD and groups in half. It took a while for Cabela’s to screw up my order but they finally came and I tried them out one weekend. My first experience at the range was “OK”, better than my previous load but just ok. Later that evening I thought about it some more and realized I had not tightened the front rest ears on my SEB Mini. I shot good-ish groups but there was too much elevation The above range session is a true representation of how it improved my load.
 
I was going with it being a trick question and you put the .284 down and started shooting the “creed”.

Seriously though, that primer change made a huge difference
 
My go to primer use to be the Commie white/red box or Wolf. A good friend/champion shooter told me about the S&B primers and how it would cut my SD and groups in half. It took a while for Cabela’s to screw up my order but they finally came and I tried them out one weekend. My first experience at the range was “OK”, better than my previous load but just ok. Later that evening I thought about it some more and realized I had not tightened the front rest ears on my SEB Mini. I shot good-ish groups but there was too much elevation The above range session is a true representation of how it improved my load.
Sb primers have been solid. You have to build the load around them can’t just replace your current primer and expect good results. But the sd is regularly around 5 with them.
 
Sb primers have been solid. You have to build the load around them can’t just replace your current primer and expect good results. But the sd is regularly around 5 with them.
Shhhhh...don't tell that to my gun.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
170,070
Messages
2,286,500
Members
82,491
Latest member
Zimbo
Back
Top