What kind of velocity are you seeing with that load?30.9 H4895
Berger 105 hybrid jumping .004
CCI 450
Bartlien .237 1:8 30”
My reamer
picture is 5 shot groups at 300 yards
Gotta be pleased with that...Today I shot a seating depth test fire forming 6brai brass and this little jewel popped up...606yrds 30gr of Varget 105 Berger hybrids .003-.005 in the lands (I'll have to go back and measure to be sure) barrel was chambered by @Cigarcop at KW Precision.
![]()
![]()
![]()
Today I shot a seating depth test fire forming 6brai brass and this little jewel popped up...606yrds 30gr of Varget 105 Berger hybrids .003-.005 in the lands (I'll have to go back and measure to be sure) barrel was chambered by @Cigarcop at KW Precision.
![]()
![]()
![]()
Now dont freak out when you have to tune the gun to get it back to shooting that way. For some reason fire form loads can be very forgiving to powder charge. If it does it fire forming, it can do it on formed cases, but now you'll have to find it. Nice shooting.
That may be the reason some have tried more sizing in the first place to see what it would doSomething to do with softening the pressure spike maybe as the brass will give as it starts to form at the same time as the bullet starts to move?
This might also explain why running a little extra headspace can be more accurate than less?
Or maybe something to do with the inherent accuracy of the BR case??Something to do with softening the pressure spike maybe as the brass will give as it starts to form at the same time as the bullet starts to move?
This might also explain why running a little extra headspace can be more accurate than less?
I wonder what Rope2horns is using for a scope to see that little dot at 600 yrdsOr maybe something to do with the inherent accuracy of the BR case??
I wonder what Rope2horns is using for a scope to see that little dot at 600 yrds
Today I shot a seating depth test fire forming 6brai brass and this little jewel popped up...606yrds 30gr of Varget 105 Berger hybrids .003-.005 in the lands (I'll have to go back and measure to be sure) barrel was chambered by @Cigarcop at KW Precision.
![]()
![]()
![]()
Today I shot a seating depth test fire forming 6brai brass and this little jewel popped up...606yrds 30gr of Varget 105 Berger hybrids .003-.005 in the lands (I'll have to go back and measure to be sure) barrel was chambered by @Cigarcop at KW Precision.
![]()
![]()
![]()
Trying to learn something here as I'm not a 6mm shooter, what is the reason for the uptick in interest for the 6BRA over the Dasher? Is it more accurate etc? For a while everyone was on the Dasher train if I remember correctly.
C’Mon over Jade! You need a 6mm in your life...it’s just like the 308 only necked down and shortened a good bit and lots less powder, half the bullet you shoot now, etc... Other than that it’s about 30-40% less per shot to reload.
If I started shooting one of those little ultra accurate low recoil pop guns I wouldn't wanna shoot my rock chuckin .308s anymore, I'd get spoiled with that pea shooter........![]()