Harrell's Tuner Question

[jesilva]

Will a Harrell's tuner for rimfire work on a centerfire rifle?

 

[Chfcemerson]

No...
Number one the rimfire tuner slides on over the 22 barrel and is tightened down down with a compression slit with an a allen head screw. A centerfire would probably blow it right off.

 

[USMCDOC]

No...
Number one the rimfire tuner slides on over the 22 barrel and is tightened down down with a compression slit with an a allen head screw. A centerfire would probably blow it right off.

How do you think that "iron" sight mounts stay on a center fire rifle?

 

[gunsandgunsmithing]

Will a Harrell's tuner for rimfire work on a centerfire rifle?

As has been mentioned, they slide on the barrel. They can slip under recoil and create problems. Do yourself a favor and get a tuner designed for and threaded directly to your cf barrel.

 

[Ringostar]

Will a Harrell's tuner for rimfire work on a centerfire rifle?

Jim, Are you interested in a tuner for one of your F class rifles? I can meet you at the range some morning and you can see how mine operates and mounts. Keith

 

[jesilva]

Jim, Are you interested in a tuner for one of your F class rifles? I can meet you at the range some morning and you can see how mine operates and mounts. Keith

The reason I asked is that I do not have any barrels threaded at the muzzle and I was thinking of trying a tuner on my 6BR or 6XC without the trouble of getting the barrel threaded. Keith, is yours threaded or clamp on. Jim

 

[Ringostar]

I have a threaded tuner from Erik Cortina. They don't have the big mass on the barrel, but still change harmonics.

 

[GSPV]

How do you think that "iron" sight mounts stay on a center fire rifle?

Look around. Of all the tuners, brakes, flash hiders, and suppressors for centerfires, do you know of one that clamps on? There *is* a reason.

 

[USMCDOC]

Look around. Of all the tuners, brakes, flash hiders, and suppressors for centerfires, do you know of one that clamps on? There *is* a reason.

Nope.. but then again.. iron sight mounts aren't threaded onto a barrel and they don't go flying off either if properly affixed.. Mine is attached with two set screws, it hasn't moved one bit!