Case trimmer pilot question

[CKshooter]

Hey folks,
This may be a silly question. I just purchased an RCBS trim pro 2 and it doesn't come with a .264 pilot. We are Amazon prime customers and they don't have the RCBS pilot. Will Lyman, Forster, Sinclair pilot fit into RCBS trimmer?

 

[3dflyer]

I believe you can order the correct pilot directly from RCBS. Their site indicates that the RCBS pilots won't work in other brands.

http://rcbs.com/Products/Case-Preparation/Case-Trimming/Case-Trimmer-Pilots.aspx
http://rcbs.com/Products/Case-Preparation/Case-Trimming/Case-Trimmer-Pilots.aspx
Regards,

 

[CKshooter]

I believe you can order the correct pilot directly from RCBS. Their site indicates that the RCBS pilots won't work in other brands.

http://rcbs.com/Products/Case-Preparation/Case-Trimming/Case-Trimmer-Pilots.aspx
Regards,

 

[CKshooter]

Thanks much, was hoping I could save a couple bucks through Amazon and take advantage of free shipping.

 

[Milo 2.0]

Before you waste 5 bucks on a pilot, look into their 3 way cutters, it saves a lot of work.

 

[CKshooter]

Before you waste 5 bucks on a pilot, look into their 3 way cutters, it saves a lot of work.

Yeah, I thought about them, but I already have 2 top quality chamfer tools and an inside neck deburring tool. It might be worth it though with the price of shipping through midway, brownells, ect. Thanks much for your input though.

 

[Milo 2.0]

I just know if you used one set right, you'd only chamfer your cases between loadings, and never deburr a case again.

 

[CKshooter]

I just know if you used one set right, you'd only chamfer your cases between loadings, and never deburr a case again.

My response was incorrect. I use 2 chamfer tools. One at 30° and another @45°. And deburr the outside of the neck.