wtb .410 3" chamber reamer

[akajun]

anyone have one lying around? have a over and under with super tight chambers, prob CIP spec instead of Saami since its made in turkey. chiappa is absolutely useless with their customer service.

 

[Dusty Stevens]

Smooth em out with emory cloth in the lathe or if its a lot use a boring bar. Make sure theyre not chrome plated

 

[shortgrass]

Tight shotgun chambers? I'd hone 'um. Using a reamer would be a recipe for disaster. And as Dusty said, 'Make sure they're not chrome plated".

 

[shortgrass]

If you have not done so already, try a different brand of shot shells.

 

[akajun]

Smooth em out with emory cloth in the lathe or if its a lot use a boring bar. Make sure theyre not chrome plated

They are, just confirmed

 

[akajun]

If you have not done so already, try a different brand of shot shells.

Remingtons fit but the chambers still too small for any other brand if she’ll , which is ridiculous
Plus any 410 she’ll is hard to find
Chiappa said it’s “ in spec” maybe cip but not saami and I’m not in Europe

I’m going to do some more measuring
I think I can fix it by step reaming with carbide chucking reamers then using a chamber reamer

Really don’t wanna single point a bore that small on an over and under unless I have to my

 

[Walt Krafft]

Move it down the road and let someone else deal with it.

 

[akajun]

Move it down the road and let someone else deal with it.

Ha
It’s not even mine, family member , you know how that goes

 

[DaveTooley]

Ha
It’s not even mine, family member , you know how that goes

Sometimes it's OK to say "NO"

 

[hpshooter]

Really don’t wanna single point a bore that small on an over and under unless I have to my

Possibly use an old style brake cylinder hone and or an adjustable reamer?

 

[Dusty Stevens]

Its got chrome lining. Throw in a box of remington shells and remove it from your life

 

[Ggmac]

A brake cyl home should cut the chrome . I know it did on a set of chrome lined wheel cylinders. Previous owner had them chromed inside and out .

 

[Dusty Stevens]

A brake cyl home should cut the chrome . I know it did on a set of chrome lined wheel cylinders. Previous owner had them chromed inside and out .

A lot will cut the chrome, but at the end of the chamber where its left itll start peeling up

 

[Walt Krafft]

Nothing good will come from cutting on a chrome plated bore.

 

[Ggmac]

It sure will but with enough shots through it , it wont take long for all of it to be gone . Probably will never show up on the target

 

[akajun]

It sure will but with enough shots through it , it wont take long for all of it to be gone . Probably will never show up on the target

My elderly uncle just wants to shoot skeet with his grandson at 4h
His old shoulders can’t even take a 20 ga anymore
I think I have a plan
I’m going to make a case gauge for his chamber and tell him to buy an MEC supersizer and resize any shells that won’t fit if he can’t find Remington shells
It’s only the brass that hangs up and not by much
I’d thought of running a carbide chucking reamer in deep enough to just cut the brass area of the chamber then honing the step I created
I think the supersizer will be easier