• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

wipe-out use after questions

After using wipe out cleaner, Got the barrel clean, I can go ahead and use a Montana bore conditioner, that would be fine right? Just need to know if the chemicals in wipe out can react with other chemicals. Thanks everyone
 
jred 2002 said:
After using wipe out cleaner, Got the barrel clean, I can go ahead and use a Montana bore conditioner, that would be fine right? Just need to know if the chemicals in wipe out can react with other chemicals. Thanks everyone

I try not to mix different cleaners. If I'm using Wipe Out, I'll stick to the Accelerator or Patch Out. If I'm using Bore Tech, I'll stick with their line. If I do switch I swab the barrel with a couple patches of denatured alcohol or brake cleaner to avoid any interaction. When clean enough, I run a patch several times through the bore that is wetted with Lock EEze & Kroil. The rifle is the stored muzzle down in my safe. The first cold shot is right where it should be.
 
chino69 said:
jred 2002 said:
After using wipe out cleaner, Got the barrel clean, I can go ahead and use a Montana bore conditioner, that would be fine right? Just need to know if the chemicals in wipe out can react with other chemicals. Thanks everyone

I try not to mix different cleaners. If I'm using Wipe Out, I'll stick to the Accelerator or Patch Out. If I'm using Bore Tech, I'll stick with their line. If I do switch I swab the barrel with a couple patches of denatured alcohol or brake cleaner to avoid any interaction. When clean enough, I run a patch several times through the bore that is wetted with Lock EEze & Kroil. The rifle is the stored muzzle down in my safe. The first cold shot is right where it should be.

+1
 
Call Sharp Shoot R, makers of Wipe Out, they would be the best to answer your question.
785-883-4444
 
Thanks everyone, I patched it out real well, put a little bore conditioner, I have say the wipe out, really does what they say. I think the hose method is the only way to go .
 
Have started to use their products exclusively...
With a few drops of Kroil.

Anyone thinking about ordering the WipeOut foam should get the hose attachment.
 
Looking at my bottle of patch out it says you don't need to use anything else it leaves the barrel with a conditioner or protection after cleaning. Both made by same people Patch Out or Wipe Out.
 
zillla said:
I have the hose dealio but it is sitting on the shelf. Haven't figured out how to attach it.

If yours is like mine, you pop the whole black top off the WipeOut can and replace it with the one that came with the hose attached.
 
GSPV said:
zillla said:
I have the hose dealio but it is sitting on the shelf. Haven't figured out how to attach it.

If yours is like mine, you pop the whole black top off the WipeOut can and replace it with the one that came with the hose attached.

Just use patch out. Same stuff without the mess.
 
Erik Cortina said:
Just use patch out. Same stuff without the mess.

THIS

&

bdale said:
Looking at my bottle of patch out it says you don't need to use anything else it leaves the barrel with a conditioner or protection after cleaning. Both made by same people Patch Out or Wipe Out.

THIS

Great stuff!!
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,267
Messages
2,215,183
Members
79,506
Latest member
Hunt99elk
Back
Top