SELLING Win m70 338-06 with Hart Barrel

[BigGame]

Winchester model 70 action with a 25" 1:10 twist stainless Hart barrel (490 shots on it) chambered in 338-06. The stock is a black composite from HS Precision. The gun weighs about 8.5 lbs. Excellent condition.

The riflescope is not included in the sale, though it's listed here separately (Swarovski Z3). The Talley 1" rings will stay with the rifle (the rings are bedded, medium height).

I have 100 pieces of 338-06 headstamped Norma brass fireformed to this chamber - the buyer will have the option to buy these for an additional $125. I also have 101 pieces of 338-06 headstamped Weatherby brass fireformed to this chamber - the buyer will have the option to buy these for an additional $100. I also have a 2-piece set of Redding full-length dies including a micrometer in the seater (also a Lee crimp die) - the buyer will have the option to buy these for an additional $75. I still have the original 30-06 barrel which I will throw in at no additional cost.

$1,000.

 

[BigGame]

Bump

 

[Frankm]

Nice looking Thumper; someone wanting one well here you go. Good Luck with sale !

Curious, western or eastern Oregon on location?

 

[BigGame]

Thanks for the interest!

I’m in western Oregon.

 

[BigGame]

Bump

 

[longrangehunterII]

Free bump. My favorite .338 for hunting in any State. How does it shoot? Do you have any test targets at 100 yards, and/or further showing how well it shoots?

The 210 grain partitions were hard to beat!

 

[BigGame]

Thanks for your interest!

I have good records on its accuracy (around 1 MOA), but I don’t take or keep many pictures of targets. I’ll have to look around.

I’ve tried several bullets in it, but my favorite is the 205g Hammer (Power Hammer). My load is 2,867 fps over 57g Varget. Great load.

 

[BigGame]

Bump

 

[BigGame]

Bump

 

[ISS]

Pre-64 or new?

 

[BigGame]

It’s a “Classic” model from the late 1990s that replicates the Mauser-style extractor of the pre-64 models.

Thanks for the interest.

 

[BigGame]

Bump