wilson seating die question

[baredog]

going to purchase a wilson chamber type seater die for 6mm br do i get regulor or os oversize im not sure could use advise ..thanks Barry

 

[L.Sherm]

going to purchase a wilson chamber type seater die for 6mm br do i get regulor or os oversize im not sure could use advise ..thanks Barry

You sure your not looking at the 6PPC one.

 

[powderbrake]

I looked at Wilson's website and there is only one choice for 6mmBR.. The only one I saw with an OS in the part number was for a 6mmPPC.... totally different cartridge.

If you are going to shoot one of the low drag designs, like in the 88 or 105 bergers, order the VLD seating stem.

 

[baredog]

looked again on creedmmr sports its got os for 6mmbr

 

[baredog]

is os so brass dont stick and you have to use scredriver to pop out

 

[L.Sherm]

is os so brass dont stick and you have to use scredriver to pop out

I think a phone call to Wilson is in order.

 

[Bill K]

If it was me, I would ask Creedmoor Sports to be sure. Or call Wilson and see what they say on which die for your needs to use.

 

[NZ_Fclass]

Get the regular 6BR die. Why would you need an oversize anyway, if you are full length sizing your brass?

 

[PatMiles]

going to purchase a wilson chamber type seater die for 6mm br do i get regulor or os oversize im not sure could use advise ..thanks Barry

Call Wilson?

 

[BoydAllen]

You could always send them a note with a sized case, asking for its return with which ever die they recommend. Back in the day, I had them make a couple of custom dies (neck and seating) for my new tight neck .222 that had been chambered with a custom reamer. I was and am very pleased with the results.

 

[urbanrifleman]

going to purchase a wilson chamber type seater die for 6mm br do i get regulor or os oversize im not sure could use advise ..thanks Barry

LE WILSON 6BR Stainless Steel Bullet Seater with Micro Adj-FREE SHIP

6BR Stainless Steel Bullet Seater with Micro Adj-FREE SHIP

theurbanriflemanstore.com

 

[baredog]

took brad up on his offer

 

[baredog]

I did call wilson and they do make os version in 6mm br and it is recommended for older sakko rifles and neck sizes over .268

 

[Mike TackleBerry]

Part Number: MBS-S6M-BR

 

[urbanrifleman]

took brad up on his offer

Thank you sir!! I'll get that shipped today!!