• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Will adjusting a scope make it go bad?

Please guys, I'm here to learn not fight.
thanks for the good input , not the bad.

Don

Last year alone, I had 3 scopes from the same manufacturer ranging in price from $800-1500 all fail to track correctly after somewhat extended use.... and by that I mean 3-700 rounds.

The most expensive of the bunch, and at the time a flagship model, had a catastruphic failure that at first allowed for good groups with horrible POI shifts and then groups opened from .3s to 3.0s. I sent it back and sold it as a repaired scope to a coyote hunting friend.

The other two were the same model, and both of them were repaired and I still have one.

After that, I became a Nightforce only man, except for simple hunting optics, for which I may use a Zeiss, Leupold, Burris, etc.

I’ll note an exception here, the Conquest V6 3-18x50, which is a tracking son of a gun and has been a problem free scope.

So, yes, adjusting scopes can and will make them go bad if they’re not up to the task.
 
Anything mechanical, assembled by humans can and will have problems. A variable power scope has a ton more parts than a fixed power so a problem with one is more likely. These days we are lucky to have as many good scopes as we do. If serious competitors didnt test every component for weak points we would be in a lot worse shape.
 
So what's the skinny on Vortex? I here people trashing them, I've personally never had a problem with tracking or holding zero.
I have 3 vortex scopes
 
I think it's wise to have 3 Vortex scopes that way when one is in for repair you can mount the other one on your Creedmoor and keep shooting!
Just messing with you Bro..
J
LMAO
Oh the creed sports a super sniper wouldn't you know.
Side note: I'm feeling like part of me is missing, bolt is with bolt fluter, the rest is out for bedding.
 
How would you take this remark?
Sounds to me like pirate ammo, when you have a problem ship that problem to a new "victim". Your terminology, not mine.
I don't care to be thought of as a"victim" when I buy something.

This thread link will explain pirate ammo's post. It was actually an inside joke between members of the Secret Creedmoor Club and had nothing to do with a business transaction of any sort. pirate ammo (Captain Dan) is a vendor you can trust.

http://forum.accurateshooter.com/threads/secret-creedmore-club.3956460/
 
Last edited:
This thread will explain pirate ammo's post. It was actually an inside joke between members of the Secret Creedmoor Club and had nothing to do with a business transaction of any sort. pirate ammo (Captain Dan) is a vendor you can trust.

http://forum.accurateshooter.com/threads/secret-creedmore-club.3956460/
Now back to our regularly scheduled program of Captin Dan chasing 1 of his wild pigs with a dress and red lipstick.

Forgive me lord, I sometimes have impure thoughts.
 
Headin to town now, I got friends that will let me hold thier rifles, 1 Christianson arms, and a Barrett. Nuthin quite as nice as my Ruger.
got fresh hornady brass courtesy of the pirate. Could use a new loading block tho.
 
Inside the scope tube, the reticle is housed in a smaller tube called the erector tube, which rests on springs that are on the opposite side of the windage and elevation knobs. When you adjust the elevation knob “down,” you are actually applying pressure to one side of the erector tube, which compresses the spring on the opposite side. If you adjust either knob as far as it will go, the spring either becomes bound up and refuses to move, or it becomes so relaxed that the adjustment knob starts feeling mushy and indistinct.

When the adjustments feel mushy, the spring that pushes against the erector tube is relaxed and not able to keep proper tension on the tube. A bump to the rifle or even regular recoil can push the erector tube to a different spot – and you end up with scope shift! Some scopes are designed to minimize this problem – but yours may not be, so keep scope knobs fairly well centered (up/down and left/right).https://www.pyramydair.com/blog/2005/03/another-cause-of-scope-shift-over-adjusted-scope-knobs/

This is how i understand it.

The reticle is not mounted in the erector cell... it is rigidly mounted in the tube and does not move. The erector cell moves the image on the reticle. I know Pyramydair says that, but they are wrong.
 
The reticle is not mounted in the erector cell... it is rigidly mounted in the tube and does not move. The erector cell moves the image on the reticle. I know Pyramydair says that, but they are wrong.

You sure about that? Ive frozen my fair share of different brands and ive seen the reticle screwed onto the end of the erector tube. These were high end scopes so it may not apply to all
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
168,540
Messages
2,256,954
Members
81,353
Latest member
Mitchellcraig
Back
Top