what powder

[kochie]

what powder has worked well in your 22 CM & 85.5 bergers ?

 

[cp generation]

what powder has worked well in your 22 CM & 85.5 bergers ?

H1000 works good in mine with 85.5 and 90's

 

[kochie]

H1000 works good in mine with 85.5 and 90's

ok thanks for info

 

[Maximus1840]

what powder has worked well in your 22 CM & 85.5 bergers ?

H4831, N565, RL23, Superformance has worked well for me

 

[kochie]

H4831, N565, RL23, Superformance has worked well for me

i have superformce what’s a good load i will start low where did you end up at . i have lots of that powder .

 

[Maximus1840]

The Hodgdon site lists 36 grains as a starting load and 39.3 as a maximum load with a col of 2.700

 

[B23]

If you have some or can get your hands on any RL26 will be a winner for sure. I use more RL26 then all other powders combined including my 22-243 Improved with ELD-M 80's. It's not easy to find but RL26 has been a top performer for me in a variety of different cartridges. IMR 7828ssc is often a powder that is much easier to get your hands on and it would be a good one as well.

 

[kochie]

If you have some or can get your hands on any RL26 will be a winner for sure. I use more RL26 then all other powders combined including my 22-243 Improved with ELD-M 80's. It's not easy to find but RL26 has been a top performer for me in a variety of different cartridges. IMR 7828ssc is often a powder that is much easier to get your hands on and it would be a good one as well.

ok thanks i do have some RL 26 on hand not much but two pounds will get me started.