What is the best Decapping Only Tool

[rkittine]

Great time to sit and decap lots of brass before cleaning and reloading. What is everyone's favorite easy to use all in one tool?

Bob

 

[mikecr]

https://www.neiljones.com/html/decapping_tool.html

 

[ashiha]

I like this one:
https://www.amazon.com/dp/B00RPABDZO/?tag=accuratescom-20

 

[rkittine]

Thank you. I was wondering if anyone had experience with the Franklin tool as I have some many different calibers to decap and the universal collet seemed like a great feature.

 

[Richard Coody]

Personally i use.this one to deprime at the range.

https://harveydeprimer.com/

Now i have a lee universal in a.partner press mounted to a picnic table in the back yard i use when I am home. Use the redding universal for small pin cases with the partner.

 

[sqrlgtr]

Another vote for the "harvey deprimer".

 

[R.Morehouse]

I use the Neil Jones tool mentioned above on my 6ppc brass. It has done countless cycles and I never have an issue.

Regards
Rick

 

[memilanuk]

Another +1 for the Harvey... from .223 Rem thru .338LM (at least).

 

[Hohn]

I use the Lee universal and have no problems. But I don't presently run any small flash hole brass either. I'll probably just turn down the pin when/if I do.

 

[Mark W]

I use a lee universal decapping die without complaint. I did have to turn down the pin for the small flash hole in my 6BR brass.

A friend of mine uses that frankfort arsenal tool that @ashiha posted above and he absolutely loves it.

 

[Dub]

I use the Neil Jones tool (s) for all my depriming
One great benefit is I can feel loose primers

 

[DHuffman]

I like this one:
https://www.amazon.com/dp/B00RPABDZO/?tag=accuratescom-20

Me too! Handy tool keeps all the crud in the tool!

 

[Ccrider]

I bought the Harvey and Frankfort tools at the same time. I sent the Frankfort back. Use the Harvey regularly.

I also have the Lee tool and use it when at the press. I had to turn down the punch for small primer usage.

 

[skiutah02]

Another one for the Harvey. Great tool. Probably don't have 100,000 rounds through it. But, that's probably. Drew

 

[afret]

This one works really well. I used the Lee recapping die before on my Forster Co-Ax and every few times the edge of the die would hit and dent the mouth of the brass. Doesn't happen with the FW.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Sniper338]

21st century

 

[rkittine]

Thanks All - Harvey won out and I have ordered one.

Bob

 

[jepp2]

Another +1 for the Harvey... from .223 Rem thru .338LM (at least).

Actually does the 20 calibers as well.

 

[Gabe22BR]

I use the Redding decapper w/ 17/20 cal rod installed...

 

[sqrlgtr]

Thanks All - Harvey won out and I have ordered one.

Bob

Dont think you will be disappointed with it.Its so easy a Benchrest shooter can do it .