BEST DE-PRIMING TOOL ... dedicated station

[jds holler]

I vote Lee Universal Decapper. And for us 20 cal shooters the shaft measures .2025" and works great as a mandril for final inside sizer for leaving your 20 cal case with great neck tension. (my opinion) jd

 

[dolek]

I vote Lee Universal Decapper. And for us 20 cal shooters the shaft measures .2025" and works great as a mandril for final inside sizer for leaving your 20 cal case with great neck tension. (my opinion) jd

Great tip...I did not realize this . Thanks

 

[jpx2rk]

I've got a Lee decapper die that works w/o issue in a Lee press. I process crimped 223 so got a Mighty Armory decapper set up with the swage option. Both functions work very well in the MA set up, can order 20 cal decap pins if need, swapping pins is very easy.

 

[Liven The Dream]

I posted here about a year ago for the same question ??
I am doing SP .308 Palma and 6 dasher.

Redding Small Pin DE capping Die in a Lyman C Press

Not the cheapest but is mounted on the end of the Bench and is doing it's job.

 

[JohnHenry]

Neil Jones decapping tool.

http://www.neiljones.com/html/decapping_tool.html

 

[tstowater]

Generally the cheap Lee C press with either a Lee universal decapper die or the Redding decapper for the 17 and 20s. Sometimes, if I know that I need to trim brass, I will do a quick clean on the brass and run through a Rockchucker with a FL dies and a case kicker and upgraded primer catcher. The case kicker really speeds up the process and the primer catcher does a much better job of keeping the spent primers off the floor. Need to put a case kicker on the Lees.

 

[77racer]

Frankford Arsenal hand deprimer

 

[dig]

Frankford Arsenal hand deprimer

Used the Lee for a few years the stem loosens occasionally. Went to the Redding set for the big brass, 378 Bee and such. No issues.

 

[JimPag]

I have a Harvey and Neil Jones. Both will do the job well.

 

[Baddog0302]

Since I don't live vicariously through your wallet, either screw your sizing dies decapping stem well below your die's base and use your press , OR get the LEE Univ. die and Lee's
https://www.amazon.com/dp/B000NOQIFO/?tag=accuratescom-20
hand press, get comfortable in your big recliner ,and de prime while watching TV

 

[Prose]

An old pacific press and lee universal with a primer catch made by @The German

 

[Greg Brooks]

It’s expensive but worth every dollar.

http://www.pmatool.com/lenzi-hand-decapping-tool/

 

[Fotheringill]

No complaints with RCBS or Lee.

 

[cw308]

Fotheringill
Mark , I done for the season my wife fractured her right wrist , had to be pinned and plated . See you guys in the warmed months . Be Well .

Chris

 

[hambone1971]

Dedicated $35.00 Lee Press and Lee Depriming Die at one station for all my rifle brass. Simply just works.

 

[1shot]

Redding Small Pin DE capping Die in my co-ax press. I like the idea of the primers getting collected in the little jar, instead of getting stuck to the bottom of my shoes, then scratching my hardwood floors.

Lloyd