• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

what bushing for 284 Win

Hey, what size redding bushing do i need for .003 neck tension when using necked up Lapua 6.5x284 brass? I will not be turning the necks.

Thanks, Riley
 
Both bushings and neck thickness vary a little. Load a dummy round and measure the loaded neck diameter. Try the next larger bushing, first. (i.e.: if the loaded diameter is .313", try a .311" bushing.) Measure the sized neck diameter. If it is Ø.310", you are there. If it is Ø.311", try the next size smaller. If it is Ø.309", go one larger. Pretty simple.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,294
Messages
2,215,833
Members
79,519
Latest member
DW79
Back
Top