Following the help file I raised the front of the scale to get the calibration to run. Raised it more to get to the 0.20 GN/s as recommended. Looks to me getting the small tube to 0.20 GN/s is the key.
Current settings with H4350 and a target weight of 41.0
Bulk speed 6
Transition 1.5 GN (2.0 might be better)
Finish speed 4 (3 might be better)
Buffer 0.8 GN
I threw about 50 charges with these settings and tossed 2 overthrows of 0.04. I loaded a box of 50 also at these setting and tossed 2 more overthrows of 0.04. These were the only overthrows and none were more than 0.04, about 2 kernels each. That is an accuracy rate of 96% so far for me with the new software. Time for each charge dispensed averaged about 11 seconds. I didn't time for those I loaded. The front of the scale is one full bubble high to get the 0.20 GN/s Adam recommends. With the scale level, according to the bubble level, the high and low GN/s settings were maxed and I got consistent overthrows of up to 0.10 or more. The more I raised the front of the scale the closer to 0.20 GN/s I got and also got fewer and fewer overthrows and much closer to the desired charge weight.
Just my limited experience but hope it helps.
Current settings with H4350 and a target weight of 41.0
Bulk speed 6
Transition 1.5 GN (2.0 might be better)
Finish speed 4 (3 might be better)
Buffer 0.8 GN
I threw about 50 charges with these settings and tossed 2 overthrows of 0.04. I loaded a box of 50 also at these setting and tossed 2 more overthrows of 0.04. These were the only overthrows and none were more than 0.04, about 2 kernels each. That is an accuracy rate of 96% so far for me with the new software. Time for each charge dispensed averaged about 11 seconds. I didn't time for those I loaded. The front of the scale is one full bubble high to get the 0.20 GN/s Adam recommends. With the scale level, according to the bubble level, the high and low GN/s settings were maxed and I got consistent overthrows of up to 0.10 or more. The more I raised the front of the scale the closer to 0.20 GN/s I got and also got fewer and fewer overthrows and much closer to the desired charge weight.
Just my limited experience but hope it helps.