So, I recently bought a new Turbo V3 rimfire. It has Davidson bases. I ordered a new 30mm 40x56 scope. Because of the size of the bell, I picked up some "high" 30mm rings. After putting it all together, it was way high. So I then picked up some "mediums". Put it all back together, I took it out to shoot yesterday, and it is still to high as the reticle bottoms out and point of impact is 2-3" low at 50 yds. Should I try and find "low" rings or will I need to go with "MOA" rings or base as well??
Turbo V3 rings/bases
- Thread starter WSSM Shooter
- Start date
linekin
Gold $$ Contributor
If you're referring to running out of adjustment in the scope I'd suggest using Burris Signature Zee rings with the offsets. Had a simialr problem with one of my rifles & they were the ticket. Had to swap the Davidsons to Weaver bases though as I'm not sure they're made Davidson style rings.
Keith
Keith
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.