Heights of Burris Signature Zee rings?

[memilanuk]

Anybody know offhand the respective heights of Burris Signature Zee rings, specifically the 30mm flavor? I've got a set of mediums on a gun right now,Savage 12F/TR w/ Farrell 20moa base + NF 12-42x BR scope)and the front scope bell is about an RCH above the barrel. I need to put some of the offset inserts in to center up my elevation a little better... but then the scope hits the barrel,not good). Picked up another set from a team-mate that are in a package marked 'High' but they sure don't look it... they look just like my 'Mediums'. I'm getting a set of 'Extra Highs' just to be on the safe side, but I'm still wondering if that second set is mis-labeled/packaged.

Thanks,

Monte

 

[Jedjr]

I just took a set of Extra High 30mm Burris rings with the inserts off 2 days ago. They measure .501 from the inside of the ring, without the inserts in, to the cut for the base. These are Weaver style rings with the cross screw. I put a set of Medium rings on a Farrel base with 0 moa and have plenty of clearance on the 12-42 Nightforce. All of that is on top of a Savage VLP.

 

[memilanuk]

Jed,

Thanks for the info on the Extra Highs. I'll measure that spare set of rings, as well as the mediums I have on now when I get to swapping them around. W/ a '0' base I probably would have been fine... but a 20 moa base combined w/ +10 in the rear tipped the scope forward enough that it's a dang close fit. Tried doing it w/ a set of -10 in the front as well for even more boost, but it *was* hitting the barrel.

Thanks,

Monte