Tubb 2000 Firing Pin Print

[Twdmar]

I am working on making up a blueprint of the firing pin for the Tubb 2000/Mcmillan Alias. I think its incomplete and may have some inaccuracies.
I don't have physical access to a firing pin to measure. I was able to get a copy of a blueprint that the owner of the T2K in the low 100 serial range. The original blueprint was a little unclear, so I've cleaned up as best I can. Some of the numbers on it were conflicting.
If anyone has one of these rifles and is interested in checking the numbers and providing some feedback, it would be very appreciated. Thanks

 

[Highpowernut]

I am working on making up a blueprint of the firing pin for the Tubb 2000/Mcmillan Alias. I think its incomplete and may have some inaccuracies.
I don't have physical access to a firing pin to measure. I was able to get a copy of a blueprint that the owner of the T2K in the low 100 serial range. The original blueprint was a little unclear, so I've cleaned up as best I can. Some of the numbers on it were conflicting.
If anyone has one of these rifles and is interested in checking the numbers and providing some feedback, it would be very appreciated. ThanksView attachment 1526720

I have one, but will need to pull the pin out to measure. Might be a couple weeks but could verify this for you.
Mine has a custom serial number but was delivered in 2006.

FYI the atlas from McMillan has a different bolt and would therefore be a different firing pin I believe.


Wayne

 

[Twdmar]

I have one, but will need to pull the pin out to measure. Might be a couple weeks but could verify this for you.
Mine has a custom serial number but was delivered in 2006.

FYI the atlas from McMillan has a different bolt and would therefore be a different firing pin I believe.


Wayne

Thanks, that would be great. With the lack of parts, putting together some data would be a good thing.
I am not certain but i believe the big difference in the t2k and alias bolt is where the handle is welded on. Beyond that, I'm not sure.