Trtying a new Powder Hybrid 100

[Rustystud]

I Just worked up some loads in 300 WSM. Shooting 180 Nosler Accubonds, 180 Swift Scirocco, and 180 Barnes Tipped Triple shocks. Have not been able to replenish my Federal 215 GMM primers so I am using CCI 250 Larger Rifle Magnum primers. Tried loads with H-4350, H-4831SC, IMR 7828, and H-Hybrid 100. got 100-200 fps higher velocity out of the Hybrid 100. 64 grains with the Barnes Tipped Triple Shocks gave me 3011 fps average with a 14 fps ES. Shooting a factory Browning A Bolt that I installed a Harrell's radial brake on. Shot several .5 MOA five shot groups at 100 yards.

This Hybrid 100 is a new powder with burn rate between H-4350 and H-4831 SC. Meters well and if it is not temperature sensitive it will be a very successful powder.
Nat Lambeth

 

[1lnbrdg]

I've been looking at this powder too for my 6mm SLR. It's supposed to be one of the "cooler" burning powders. Dang price is right on it from Powder Valley.

 

[wbm]

Used it with light bullets in 7mm magnum....ended up being my favorite powder for 120gr Nosler Ballistic Tips.

 

[CHESSIEHUNTER12]

I use this in 280 and 280ai with 140 gr TTSX. Also in 7-08 with 120 gr TTSX. Very pleased with results. All shoot .5 - .75 moa in factory rifles.

 

[stacy]

I THOUGHT THAT POWDER HAD BEEN DISCONTINUED!!!!!!!!!!!!!!!!

 

[rudysts]

I use this in 280 and 280ai with 140 gr TTSX. Also in 7-08 with 120 gr TTSX. Very pleased with results. All shoot .5 - .75 moa in factory rifles.

Been wanting to try that powder in my 280 Rem you just reminded me.

Thanks