Trigger spring

[madmixerman]

Anyone know of a source to obtain a Jewell "C" trigger spring ?

 

[Stumpy1]

Watching.

I just ordered a few springs from McMaster, one or more of which I hope will work out. A friend had a Jewell go south because the trigger spring got mooshed (technical term).

Frank

 

[madmixerman]

Watching.

I just ordered a few springs from McMaster, one or more of which I hope will work out. A friend had a Jewell go south because the trigger spring got mooshed (technical term).

Frank

That's an idea, but would like to get the correct spring .

 

[Iowa Fox]

Wolf

 

[trap]

please call 541 290 3949

 

[madmixerman]

Wolf

Wolff doesn't have anything like it.

 

[Iowa Fox]

Wolff doesn't have anything like it.

I have long wondered who makes them. Seems to be a closely guarded secret.

 

[WyleWD]

That's an idea, but would like to get the correct spring .

Watching. I could use a few of them myself, so I need a source to get them from. WD

 

[Stumpy1]

OK, the springs came in (finally) from McMaster, and by-and-large, they work.
Details follow.
1. All of the springs I will list fit into the trigger lever
2. I made no attempt to fine-tune the pull weight, but put the setscrew to about the same place
3. Pull weights are an average of 5 pulls
4. The action is a Nesika K of unknown heritage

I imagine that they aren't perfect by any means, but they might help someone out who doesn't have any springs at all until the proper replacements can be obtained.

I will endeavor to find a heavier spring, as my friend is a sling shooter, and the pull weights are a bit on the light side for that application.

Frank

6	8969T242	316 Stainless Steel Corrosion-Resistant Compression Springs, 5 mm Long, 2 mm OD, 1.4 mm ID, Packs of 1 (PULL WEIGHT =5.4 ounces)
7	8969T166	316 Stainless Steel Corrosion-Resistant Compression Springs, 5 mm Long, 2 mm OD, 1.5 mm ID, Packs of 1 (PULL WEIGHT =4.4 ounces)
8	8969T131	316 Stainless Steel Corrosion-Resistant Compression Springs, 5 mm Long, 2 mm OD, 1.6 mm ID, Packs of 1 (PULL WEIGHT =3.2 ounces)
9	8969T107	316 Stainless Steel Corrosion-Resistant Compression Springs, 0.188" Long, 0.088" OD, 0.064" ID, Packs of 5 (PULL WEIGHT =6.2 ounces)
10	8969T102	316 Stainless Steel Corrosion-Resistant Compression Springs, 0.188" Long, 0.088" OD, 0.068" ID, Packs of 5 (PULL WEIGHT =3.5 ounces)

 

[Steve morgan]

Watching.

I just ordered a few springs from McMaster, one or more of which I hope will work out. A friend had a Jewell go south because the trigger spring got mooshed (technical term).

Frank

Check out lee springs.