Trigger pull weight

[K22]

I have all mine set at 2 1/2 to 3 lbs. In my experience, stock fit can significantly influence trigger pull optimization. (See comment below on this subject)

For me, having a consistent pull weight is important so I'm not "re-adjusting" to a lighter or heavier pull when I switch rifles. For me this has value. However, I do not shoot benchrest or F Class competition.

One of the reasons I like the new Tikka TX's models is the aftermarket vertical pistol grip which significantly improved trigger finger position thus enables me to shoot more consistently. The "fat" palm swell on the Bell & Carlson stocks are a problem for me to obtain an optimum trigger position. I have to slide my thumb down near the trigger finger to obtain an adequate trigger finger position on the trigger. Likewise with a lot of factory sporter stocks such as Browning and Remington.

 

[Coyotefurharvester]

I have settled on 2# 11 oz. This weight I can still feel the trigger when my finger is numb from exposure in the winter. I wear flight gloves under lined leather choppers. In double digits negative temps, it only takes a short time to lose feeling when the chopper is off setting up for a shot.

 

[rjtfroggy]

2ozs. for the bench
1.5 lbs. for hunting

 

[6fatrat]

For fullbore 20.5-21 ounces, hunting 21/2 lbs -+

 

[Kittitas George]

Mine and the 5 other guys I shoot with are all set at 2 lbs We aren't competitive shooters just gopher shooters. We also consider it a safety issue.

 

[Doug Casner]

I f you ever shot a 2oz. jewell theyll spoil you for target. I just turn mine down till they feel good on hunting triggers. Dont have scales, put a drop put a drop of sealer on the threads and put it back together. Doug

 

[KMart]

Somebody has already covered my choices

 

[Shooter13]

All of my B&A Competition triggers are right at 1oz. Most of my hunting rifles are at 3 lbs.

I'm in the process of doing the same pull on all my BR guns (that I'll shoot this year), I'll probably have the BR triggers at 1.25 oz or 35 grams.

 

[sandwarrior]

A lot of guys have stated that in Bench and F-Class 2-8 oz is more the norm. I like 8 oz as I like to not set the trigger off until I pull it. Those with 2 oz or lighter set if off just by putting a finger on it. I use 8 oz. as when I set my finger on the trigger it doesn't go off. Then with the weight of my finger it's almost like a 2 oz. when I pull. Moving my finger has a tendency to move the gun. So, I like the final control

Either way it's something you need to feel your control and get used to. I've seen both very successful.

Hunting, clearly you need more tension as you don't want an AD while moving around. Even if in a stand. I've settled on 3-3.5# and polish the sear/trigger surfaces so it's as smooth as I can get it. Coming from the target world, you can literally feel any scratch or catch when you pull the trigger. Which of course makes you move your aimpoint.

 

[xswanted]

6-8oz for target rifles.

1.5lbs for hunting rifles.

 

[LHSmith]

Those with 2 oz or lighter set if off just by putting a finger on it.

Everyone is different. I can touch the trigger at 2 oz and deliberately squeeze off when ready. To do so otherwise I would be slapping the trigger creating errant shots. For me, any lighter than 2 oz, then i start getting surprise "ignition" when I just touch.
Edit- This is on a bench gun from a solid rest.

 

[dthomas]

4 Oz for f class 1 1/2 for hunting

 

[Eagle Six]

1# 6 oz for the bolt gun with a narrow trigger face (.170") which I can feel hot or cold. 3.5# for the gas gun.

 

[shooterjon]

What is your preferred weight range for your triggers....target and hunting.

I like 10oz trigger for bench only work and 2-3 lbs for a hunting rifle.

I Prefer :
Bench rest Rifles - 2 oz. triggers
Varmint rifles at- 18 oz.
Big game rifles at - 2 lbs.
Those trigger weights seem to work very well for me,Thanks for askin.

 

[Alguapo]

6 oz. for the bench varmint rifles (not carry rifles) and 3-4 lbs. for hunting rifles.