Timing Borden with BnA trigger

[Slickrick0999]

Greetings,
So no just got to shoot my new BnA trigger in my Borden Rimrock 6ppc. I've heard of "timing" the trigger and thought I would ask here for any guidance.
Thanks,
Rick

 

[BoydAllen]

I would give Jim a call.

 

[GT Accuracy]

Rick

If your BnA is newer than mid 2014 then the BnA will time perfectly with the stock Jewell trigger hanger

In later 2014 BnA moved their sear bar to match the jewels.




Greg

 

[Slickrick0999]

Rick

If your BnA is newer than mid 2014 then the BnA will time perfectly with the stock Jewell trigger hanger

In later 2014 BnA moved their sear bar to match the jewels.




Greg

Rick

If your BnA is newer than mid 2014 then the BnA will time perfectly with the stock Jewell trigger hanger

In later 2014 BnA moved their sear bar to match the jewels.




Greg

Greg,
This is a new BnA trigger. I'm noticing a little forward movement of the firing pin inside the shroud when lowering the bolt. That is what I'm wondering about the timing.
I admit, I'm ignorant on this for sure.
Thanks

 

[GT Accuracy]

Rick,

Make sure your trigger hanger is properly installed in the Borden Rimrock action. If it's a SSR / LSR / Alpine / Timberline - PM me and we will discuss it

on the trigger hanger the R-JWL should go on the rear right side when looking down the action and barrel or if you're right handed, right under the bolt.