• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Teslong Wifi Synching Issue -- Advice?

My new teslong wifi model has taken up about 2 hours of my time and still wont work. I can connect to the wifi on my iphone but 3 different apps including the one they mention will not see it.
 
On my Android it's tricky getting it to sync, I have to open the wifi connection on the phone and manually select the app, then wait 30-60 seconds and open the app.

Kind of a pita, but it recognizes the app/camera every time that way. Hopefully they bring a new app to market soon.

Off topic, but my other gripe is the brightness control doesn't go as low as I would like it. I see that as another software issue that should be updateable.
 
You are half way there.
Click the folder and it should open to pictures.
D0BBC3A7-370F-4C07-8647-7AC8EDB597D9.jpeg
E7EF0AFF-7A3B-4D08-ABF2-3F5E86D8EA39.jpeg

If it does not open you probably have not taken any.

So:
1. leave that app open.
2. Cut your borescope on hold button for a few seconds so Bluetooth comes on.
3. Go to iPhone settings.
4. Click wifi.
5. Connect “Scopesround_8 1cc”
EE9091FE-9711-4CB4-A660-D945A1D31BC6.png 6. Go back to app.

You should be good to go then seeing picture on your phone. You can go from photo to video.
 
Neat. So you are not seeing the software in your WIFI list? I would delete and reload the software. Holding the button down on the borescope should activate the WIFI on the camera. If it is not, then something is probably wrong with the camera.
 
Neat. So you are not seeing the software in your WIFI list? I would delete and reload the software. Holding the button down on the borescope should activate the WIFI on the camera. If it is not, then something is probably wrong with the camera.
As you can see the camera is in the list and im connected to it. Its called scopearound 8140. Just now hooked to my targetvision again with no problems. 4FDB2BB9-7763-4E95-9AAB-CF883232CB4A.png
 
well, tell us what works for you. That dasher barrel looks brand new
The throat doesnt for sure. My method is nothing new. Its the same method pretty much every br shooter i hang around uses. A wet butchs patch, bronze brush soaked with butchs, wet butch patches til clean(usually 2-3). If it takes more than 2-3 or they still show black, run some iosso or red jb or flitz on a patch short stroked then start over. Takes 5 minutes if its real dirty
 
I received my borescope for Christmas. I downloaded the app on my Samsung 9+ and two different Android tablets but couldn't get the borescope to work properly. It either didn't work at all or the picture would just freeze up. The download had taken forever on each device and I figured it was because my entire family of 20 who was spending Christmas with us all had devices using my wifi. The next morning I woke up early before everyone else and uninstalled the program on each of the three devices and installed it again. This time the download on each device only took about 2 minutes and now the borescope is working perfect using each device.
 
When you clean between targets for 20+ yrs you find what works real quick and what doesnt. Lots of stuff works if you have time to soak
Nice barrel D
I would need a couple Elfin to clean between relays while I’m on pit duty.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,582
Messages
2,198,726
Members
78,989
Latest member
Yellowhammer
Back
Top