TAJ45
Silver $$ Contributor
A Bud is tooling up to do chamber work. I'm looking into possibly obtaining a set of pitch mics for tenon work. I see where 14-18 and 20-24 are std in the Starrett listings in the MSC catalog. They also list a 14 - 24 which I'm not too wild about.
Do the US actions, RugRemchestSav fall on both sides of the 1" for tenon OD? I'm pretty sure the Sav are coming in @ 1.06, but what about the Stolle, BAT, Lawton et al ?
Annnd what are the pitches on the above? Will a 16 - 20 tpi cover them all or do I need finer? I've used the three wire method as well as the wires system that fit over the anvils but pretty pricey but it would be pretty handy for a dedicated set or two of mics.
Do the US actions, RugRemchestSav fall on both sides of the 1" for tenon OD? I'm pretty sure the Sav are coming in @ 1.06, but what about the Stolle, BAT, Lawton et al ?
Annnd what are the pitches on the above? Will a 16 - 20 tpi cover them all or do I need finer? I've used the three wire method as well as the wires system that fit over the anvils but pretty pricey but it would be pretty handy for a dedicated set or two of mics.