Suppressor advise

[dbaird]

Read in a Guns&Ammo Suppressor magazine that you should either low strength locktite or Teflon tape to keep
Suppressor from loosening up while shooting. I have read other places to use anti seize lube to keep suppressor from getting stuck on. Any ideas on this?

 

[germanlongbow]

Correct fit between barrel and can is essential. Easier solution is a brake designed to be mounted tonbarelnand thread over can design like TBAC. I have both and have no issues with either loosening up. I stuck the can once with muzzle brake design. I have never used Teflon tape but on the 22 rimfire can I do use anti seize on threads. Dirty little 22 rimfire rounds.

 

[DirtySteve]

I have a direct thread and use antisieze on the threads. I check it for tightness every 10 rounds or so. Sometimes it is loose sometimes it is not.

 

[5spd]

Ive yet to have either of my 2 suppressors come loose, sometimes Ill put a tad of builders grease on the threads other times its dry or lightly oiled. I do make sure they are tight as heck when I do stick em on.

 

[STS]

If a suppressor can be screwed on over teflon tape the barrel needs to be rethreaded. Somebody botched the threading job the first time.

 

[Sniper338]

Anti seize and screw it on.. aint had a problem yet.